17HS4401 Stepper Motor – 2 Phase Hybrid ( PDF )

Part Number: 17HS4401

Function: 2 Phase Hybrid Stepper Motor

Package: Module type

Manufacturer: MotionKing

Images:

17HS4401 Stepper Motor

Description

Stepper motor is a motor that moves in discrete steps, one step at a time. It is generally used in a variety of applications where precise position control is desirable such as 3D printer, laser cutter and pick & place machine. This NEMA 17HS4401 bipolar stepper motor has a 1.8º step angle (200 steps/revolution) with 40N.cm (56oz.in) holding torque.

  1. Stepper Motor: A stepper motor is a type of motor that divides a full rotation into a discrete number of steps. Unlike a conventional motor, a stepper motor can move in precise increments, or steps, allowing for accurate positioning and control.
  2. Phase: In a stepper motor, a phase refers to a set of windings or coils that generate the magnetic field required for motor operation. Each phase typically consists of two windings, which are energized in a specific sequence to create the necessary magnetic field patterns and generate rotational movement.
  3. 2-Phase Configuration: A 2-phase stepper motor has two sets of windings or coils, which are often denoted as Phase A and Phase B. These two phases are energized in a specific sequence to produce the desired step-wise motion.

17HS4401 pdf manual

MotionKing (China) Motor Industry Co., Ltd. HB Stepper Motor Catalog 2 Phase Hybrid Stepper Motor 17HS series-Size 42mm(1.8 degree) Wiring Diagram: UNI-POLAR(6 LEADS) BI-POLAR(4LEADS) Electrical Specifications: Series Model Step Angle (deg) Motor Length (mm) Rated Phase Phase Current Resistance Inductance (A) (ohm) (mH) 17HS2408 1.8 28 0.6 8 10 17HS3401 1.8 34 1.3 2.4 2.8 17HS3410 1.8 34 1.7 1.2 1.8 17HS3430 1.8 34 0.4 30 35 17HS3630 1.8 34 0.4 30 18 17HS3616 1.8 34 0.16 75 40 17HS4401 1.8 40 1.7 1.5 2.8 17HS4402 1.8 40 1.3 2.5 5.0 17HS4602 1.8 40 1.2 3.2 2.8 17HS4630 1.8 40 0.4 30 28 17HS8401 1.8 48 1.7 1.8 3.2 17HS8402 1.8 48 1.3 3.2 5.5 17HS8403 1.8 48 2.3 1.2 1.6 17HS8630 1.8 48 0.4 30 38

Electrical Specification:

1. Motor Type : Bipolar Stepper

2. Step Angle : 1.8 deg.

3. Holding Torque : 40N.cm (56oz.in)

4. Rated Current/phase : 1.7A

5. Phase Resistance : 1.5Ohm±10%

6. Insulation Resistance : 100MΩ¸ Min, 500VDC

7. Insulation Strength : 500VAC for one minute


Physical Specification:

1. Frame Size : 42 x 42mm (1.7 inch x 1.7 inch)

2. Body Length : 40mm

3. Shaft Diameter : 5mm

4. Number of Wire Leads : 4

5. Wire Length : 400mm

6. Weigh t: 280g

7. Temperature rise : 80deg Max(rated current, 2 phase on)

 

17HS4401 Stepper Motor Datasheet