AXP288 – PMIC Optimized For Multi-Core High-Performance System

Part Number : AXP288

Function : PMIC Optimized For Multi-Core High-Performance System

Manufactures : X-Powers

Images :

1 page
AXP288 image

2 page
pinout

Description :

X-Powers AXP288 Datasheet PMIC Optimized For Multi-Core High-Performance System Revision 1.07 2014.6.24 AXP288 PMIC Optimized For Multi-Core High-Performance System Revision History Revision Rev 1.0 Rev 1.01 Rev 1.02 Rev 1.03 Rev 1.04 Rev 1.05 Rev 1.06 AXP288 Datasheet V1.06 Date 2013.12.10 2013.12.16 2013.12.18 2013.12.20 2014.1.24 2014.2.13 2014.5.23 Description Version1.0 for Intel 1. Table9-3, T0 change to 1000μs 2. Update table 9-41 and related register 3. Update table 9-43, add 4.35V OCV~percentage 1. Add Pb free description 1. Change the SCK/SDA pull high voltage to 1.8V in typical application circuit 1. Add power on interval description 2. Update table 10-92, change default value 3. Update table 10-77, remove bit[7] description 4. Change the capacitance of VCC_RTC to 10uF in typical application circuit 5. Update table 10-74, remove bit[1:0] description 6. Update table 10-36, remove bit[2] description 7. Update table 10-32, add bit[6] description 8. Swap IRQ description in REG 43H/44H/4BH/4CH 9. Update table 10-89, remove bit[1:0] description 10. Add VBAT condition in power on source 11. Correct table 10-50 description 12. Update table 10-32, add bit[6] description 13. Update the hysteresis of temperature protection threshold 14. Update table 10-9, change bit[3] description 15. Update table 10-4, describe how to clear the indication 1. Update QFN76 package description 2. Add QFN76 board layout example 3. Update table 10-106, correct bit[2:0] description 4. Correct OCV Percentage Table description 1. Version change: Reg03H: 0x41 to 0x51 2. Reg14[3] default value change to 1 3. Use Reg14[7] as an enable bit for cold reset within global reset input 4. When BC module isn’t work, disable RID detection by default 5. Update section 9.1 / 9.1.1 / 9.4 / 9.4.2 / 9.4.5 6. Update RTC_LDO output capacitor’s value 7. Update Reg80 bit[7], bit[3],bit[1] description Copyright © 2014 X-Powers Limited. All Rights Reserved. 2 Rev 1.07 2014.6.24 AXP288 PMIC Optimized For Multi-Core High-Performance System 8. Correct Reg3BH Bit[4],bit[3-0] description 9. Update the max charge current to 2.8A 10. Update electrical characteristics description 11. Correct Reg25H Reg26H default value to A8 12. Add table-1 for part number description 13. Add Package materials information Figure 11-3 14. Add RegA0H RegA1H real time value of battery voltage description 15. Update Reg80H bit[7] description 16. Update RegB8H bit[3] description 17. Add order information and table 11 18. Correct table 9-29 description 19. Correct Reg01H bit[4] description 20. Correct Reg59H, 5BH, 79H, 7BH, 7DH description 1. Add AXP288D description AXP288 Datasheet V1.06 Copyright © 2014 X-Powers Limited. All Rights Reserved. 3 AXP288 PMIC Optimized For Multi-Core High-Performance System Declaration X-Powers cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in an X-Powers product. No circuit patent licenses, copyrights, or other intellectual p […]

3 page
image

AXP288 Datasheet


This entry was posted in Uncategorized. Bookmark the permalink.