BP2833A – Non-isolated Buck Offline LED Driver

Part Number : BP2833A

Function : Non-isolated Buck Offline LED Driver

Manufactures : BPS

Images :

1 page
BP2833A image

2 page
pinout

Description :

BP2833A 晶丰明源半导体 Description The BP2833A is a high precision buck constant current LED driver. The device operates in critical conduction mode and is suitable for 85Vac~265Vac universal input offline LED lighting. The BP2833A integrates a 500V power MOSFET. With patent pending MOSFET driving technique, the operating current of the IC is very low. So it doesn’t need the auxiliary winding for supplying the chip. It can achieve excellent constant current performance with very few external components, so the system cost and size are minimized. The BP2833A utilizes patent pending current control method. It can achieve precise output current and excellent line regulation. The driver operates in critical conduction mode, the output current does not change with the inductance and LED output voltage. The BP2833A offers rich protection functions to improve the system reliability, including LED open circuit protection, LED short circuit protection, VCC under voltage protection, CS resistor short circuit protection and thermal regulation function. Non-isolated Buck Offline LED Driver Features            Critical Conduction Mode Operation Internal 500V Power MOSFET No Auxiliary Winding Ultra Low Operating Current ± 5% LED Output Current Accuracy LED Open Protection LED Short Protection Current Sensing Resistor Short Protection VCC Under Voltage Protection Thermal Regulation Function Available in SOP-8 Package Applications    LED Candle Light LED Bulb Other LED Lighting Typical Application AC BP2833A 4 VCC 2 ROVP 3 NC 1 GND DRAIN 5 DRAIN 6 CS 7 CS 8 Figure 1. Typical application circuit for BP2833A BP2833A_EN _DS_Rev.1.0 www.bpsemi.com BPS Confidential – Customer Use Only 1 BP2833A 晶丰明源半导体 Ordering Information Part Number Package Operating Temperature -40 ℃ to 105 ℃ Package Method Tape 2,500 Piece/Roll Marking BP2833A XXXXXY WWXYY Non-isolated Buck Offline LED Driver BP2833A SOP8 Pin Configuration and Marking Information GND CS ROVP NC VCC CS DRAIN DRAIN XXXXXY: Lot Code WW: Sign X: Year YY: Week BP2833A Figure 2. Pin configuration XXXXXY WWXYY Pin Definition Pin No. 1 2 3 4 5,6 7,8 Name GND ROVP NC VCC DRAIN CS Ground Over Voltage Protection Setting Pin. Connect a resistor to GND No Connection. Should be connected to GND(Pin1) Power Supply Pin Internal HV Power MOSFET Drain Current Sense Pin. Connect a sense resistor between this pin and GND pin. Description BP2833A_EN _DS_Rev.1.0 www.bpsemi.com BPS Confidential – Customer Use Only 2 BP2833A 晶丰明源半导体 Absolute Maximum Ratings (note1) Symbol ICC_MAX DRAIN CS OUT ROVP PDMAX θJA TJ TSTG Parameters VCC pin maximum sink current Internal HV MOSFET drain voltage Current sense pin input voltage Internal HV MOSFET source voltage Over-voltage setting pin voltage Power dissipation (note 2) Thermal resistance (Junction to Ambient) Operating junction temperature Storage temperature range ESD (note 3) Rang […]

3 page
image

BP2833A Datasheet


This entry was posted in Uncategorized. Bookmark the permalink.