DD12-12GWB – 12SEGMENT BAR GRAPH ARRAY

Part Number : DD12-12GWB

Function : 12SEGMENT BAR GRAPH ARRAY

Manufactures : Kingbright Corporation

Images :

1 page
DD12-12GWB image

2 page
pinout

Description :

12SEGMENT BAR GRAPH ARRAY P/N: DD-12GWB GREEN Features SUITABLE FOR LEVEL INDICATORS. LOW CURRENT OPERATION. WIDE VIEWING ANGLE. MECHANICALLY RUGGED. DIFFERENT COLORS IN ONE UNIT AVAILABLE. STANDARD: BLACK FACE, WHITE SEGMENT. RoHS COMPLIANT. Description The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01″)unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAA4187 APPROVED: J. Lu REV NO: V.7 CHECKED: Joe Lee DATE: NOV/19/2005 DRAWN: W.J.ZHU PAGE: 1 OF 3 DataSheet 4 U .com Selection Guide Part No. Dice Lens Type Iv (ucd) @ 10mA Min. DD-12GWB GREEN (GaP) WHITE DIFFUSED 1200 Typ. 5600 12 Segments Bargraph-Display Description Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage (Per Segment) Reverse Current (Per Segment) Device Green Green Green Green Green Green Typ. 565 568 30 15 2.2 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation (Per Segment) DC Forward Current (Per Segment) Peak Forward Current [1] (Per Segment) Reverse Voltage (Per Segment) Operating/Storage Temperature Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. Green 105 25 140 5 -40°C To +85°C 260°C For 5 Seconds Units mW mA mA V SPEC NO: DSAA4187 APPROVED: J. Lu REV NO: V.7 CHECKED: Joe Lee DATE: NOV/19/2005 DRAWN: W.J.ZHU PAGE: 2 OF 3 DataSheet 4 U .com Green DD-12GWB Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA4187 APPROVED: J. Lu REV NO: V.7 CHECKED: Joe Lee DATE: NOV/19/2005 DRAWN: W.J.ZHU PAGE: 3 OF 3 DataSheet 4 U .com […]

3 page
image

DD12-12GWB Datasheet


This entry was posted in Uncategorized. Bookmark the permalink.