INR18650-13Q – Lithium-ion Battery

Part Number : INR18650-13Q

Function : Lithium-ion Battery

Manufactures : Samsung

Images :

1 page
INR18650-13Q image

2 page
pinout

Description :

-SAMSUNG SDI Confidential Proprietary – Spec. No. INR18650-13Q Version No. 1.0 Specification 1. Customer 2. Product 3. SDI Model 4. Received Marking Division : : Lithium-ion Battery for power tool : INR18650-13Q Signature Date // // 5. Date of Application (YY/MM/DD) : 2007/ / 6. Supplier : SAMSUNG SDI Co., Ltd. Battery Division. // Issued Checked Approved H.S SHIN Manager CSG Luis Cho Senior Manager Quality Assurance Samsung SDI Co.,Ltd. Battery Division 0 -SAMSUNG SDI Confidential Proprietary – Spec. No. INR18650-13Q Version No. 1.0 1. Scope This product specification has been prepared to specify the rechargeable lithium-ion cell (‘cell’) to be supplied to the customer by Samsung SDI Co., Ltd. 2. Description and Model 2.1 Description Cell (lithium-ion rechargeable cell) 2.2 Model INR18650-13Q 3. Nominal Specifications Item 3.1 Nominal Capacity 3.2 Minimum Capacity 3.3 Charging Voltage 3.4 Nominal Voltage 3.5 Charging Method 3.6 Charging Current 3.7 Charging Time Specification 1300mAh (260mA, 2.5V discharge) 1250mAh(260mA, 2.5V discharge) 4.2 ±0.05 V 3.6V CC-CV (constant voltage with limited current) Standard charge: 0.91A Standard charge : 150min 3.8 Max. Charge Current 3.9 Max. Discharge Current (continuous) 3.10 Max. Discharge Current (Pulse) 3.11 Discharge Cut-off Voltage 4A(ambient temperature 25℃) 15A(ambient temperature 25℃) 30A 1sec 2.5V 3.12 Cell Weight 43.0g max 3.13 Cell Dimension Height : 65.00mm max Diameter : 18.40mm max 3.14 Operating Temperature Charge : 5 to 40℃ Discharge: -20 to 60℃ 3.15 Storage Temperature 1 year : -20~25℃(1*) 3 months : -30~45℃(1*) 1 month : -30~60℃(1*) Note (1): If the cell is kept as ex-factory status (50% of charge), the capacity recovery rate is more than 80%. 1 -SAMSUNG SDI Confidential Proprietary – Spec. No. INR18650-13Q Version No. 1.0 4. Outline Dimensions See the attachment (Fig. 1) 5. Appearance There shall be no such defects as scratch, rust, discoloration, leakage which may adversely affect commercial value of the cell. 6. Standard Test Conditions 6.1 Environmental Conditions Unless otherwise specified, all tests stated in this specification are conducted at temperature 25±5℃ and humidity 65±20%. 6.2 Measuring Equipment (1) Ammeter and Voltmeter The ammeter and voltmeter should have an accuracy of the grade 0.5 or higher. (2) Slide caliper The slide caliper should have 0.01 mm scale. (3) Impedance meter The impedance meter with AC 1kHz should be used. 7. Characteristics 7.1 Standard Charge This “Standard Charge” means charging the cell with charge current 0.91A and constant voltage 4.2V 100mA cut-off at 25℃. 7.2 Standard Discharge Capacity The standard discharge capacity is the initial discharge capacity of the cell, which is measured with discharge current of 4A with 2.5V cut-off at 25℃ within 1hour after the standard charge. Standard Discharge Capacity ≥ 1250mAh 7.3 Initial internal impedance Initial internal impedanc […]

3 page
image

INR18650-13Q Datasheet


This entry was posted in Uncategorized. Bookmark the permalink.