MCP6002 – 1 MHz Bandwidth Low Power Op Amp

Part Number : MCP6002

Function : 1 MHz Bandwidth Low Power Op Amp

Manufactures : Microchip Technology

Images :

1 page
MCP6002 image

2 page
pinout

Description :

M Features • • • • • • • Available in SC-70-5 and SOT-23-5 packages 1 MHz Gain Bandwidth Product (typ.) Rail-to-Rail Input/Output Supply Voltage: 1.8V to 5.5V Supply Current: IQ = 100 µA (typ.) 90° Phase Margin (typ.) Temperature Range: – Industrial: -40°C to +85°C – Extended: -40°C to +125°C • Available in Single, Dual and Quad Packages MCP6001/2/4 Description The Microchip Technology Inc. MCP6001/2/4 family of operational amplifiers (op amps) is specifically designed for general-purpose applications. This family has a 1 MHz gain bandwidth product and 90° phase margin (typ.). It also maintains 45° phase margin (typ.) with 500 pF capacitive load. This family operates from a single supply voltage as low as 1.8V, while drawing 100 µA (typ.) quiescent current. Additionally, the MCP6001/2/4 supports rail-to-rail input and output swing, with a common mode input voltage range of VDD + 300 mV to V SS – 300 mV. This family of operational amplifiers is designed with Microchip’s advanced CMOS process. The MCP6001/2/4 family is available in the industrial and extended temperature ranges. It also has a power supply range of 1.8V to 5.5V. 1 MHz Bandwidth Low Power Op Amp Applications • • • • • • Automotive Portable Equipment Photodiode Pre-amps Analog Filters Notebooks and PDAs Battery-Powered Systems Package Types MCP6001 SC-70-5, SOT-23-5 VOUT 1 VSS 2 VIN+ 3 + MCP6002 PDIP, SOIC, MSOP VOUTA 1 VINA– 2 4 VIN– VINA+ 3 VSS 4 A – + B + 8 VDD 7 VOUTB 6 VINB– 5 VINB+ 5 VDD Available Tools Spice Macro Models (at www.microchip.com) FilterLab® Software (at www.microchip.com) Typical Application VDD VIN + MCP6001 VSS R1 R1 Gain = 1 + —-R2 VOUT MCP6001R SOT-23-5 VOUT 1 VDD 2 VIN+ 3 + + – 5 VSS MCP6004 PDIP, SOIC, TSSOP VOUTA 1 VINA– 2 14 VOUTD A D + – + – 13 VIND– 12 VIND+ 11 VSS 10 VINC+ – + + B C 9 VINC– 8 VOUTC 4 VIN– MCP6001U SOT-23-5 VIN+ 1 VSS 2 VIN– 3 5 VDD VINA+ 3 VDD 4 VINB+ 5 VINB– 6 R2 VREF 4 VOUT VOUTB 7 Non-Inverting Amplifier  2003 Microchip Technology Inc. DS21733D-page 1 MCP6001/2/4 1.0 ELECTRICAL CHARACTERISTICS PIN FUNCTION TABLE Name Function Absolute Maximum Ratings † VDD – VSS .7.0V All Inputs and Outputs VSS -0.3V to V DD +0.3V Difference Input Voltage . |VDD – VSS| Output Short Circuit Current continuous Current at Input Pins ±2 mA Current at Output and Supply Pins ±30 mA Storage Temperature -65°C to +150°C Maximum Junction Temperature (TJ) +150°C ESD Protection On All Pins (HBM;MM) . ≥ 4 kV; 200V † Notice: Stresses above those listed under “Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and [.]

3 page
image

MCP6002 Datasheet


This entry was posted in Uncategorized. Bookmark the permalink.