SSL1005 – HIGH CURRENT POWER INDUCTORS

Part Number : SSL1005

Function : HIGH CURRENT POWER INDUCTORS

Manufactures : Superworld Electronics

Images :

1 page
SSL1005 image

2 page
pinout

Description :

HIGH CURRENT POWER INDUCTORS 1. PART NO. EXPRESSION : SSL1005 SERIES SSL1005-R10MF (a) (b) (c) (d)(e) (a) Series code (b) Dimension code (c) Inductance code : R10 = 0.10uH (d) Tolerance code : M = ±20% (e) F : Lead Free 2. CONFIGURATION & DIMENSIONS : A D R10 B E L G C PCB Pattern Unit:m/m A 10.2 Max. B 6.8 Max. C 5.0 Max. D 1.5±0.5 E 2.5±0.5 G 5.5 Max. H 4.5 Max. L 10.5 Max. 3. SCHEMATIC : 4. GENERAL SPECIFICATION : a) Operating temp. : -55°C to +125°C b) Storage temp. : -55°C to +125°C c) Irms (A) : Will cause coil temp. to rise approximately ǻT=40°C without core loss. d) Isat (A) : Will cause L0 to drop approximately 20% e) Part temperature (ambient + temp. rise) : Should not exceed 125°C under worst case operating conditions. 5. ELECTRICAL CHARACTERISTICS : Part No. SSL1005-R10MF SSL1005-R15MF SSL1005-R20MF Inductance L0 ( uH ) 0.10 ±20% 0.15 ±20% 0.20 ±20% Test Freq. ( Hz ) 0.25V/1M 0.25V/1M 0.25V/1M DCR ( mȍ ) Max. 0.65 0.65 0.65 Irms (A) Max. 40 40 30 Isat (A) Max. 50 42 40 NOTE : Specifications subject to change without notice. Please check our website for latest information. H 05.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 1 HIGH CURRENT POWER INDUCTORS 6. CHARACTERISTICS CURVES : SSL1005-R10MF SSL1005 SERIES SSL1005-R15MF SSL1005-R20MF NOTE : Specifications subject to change without notice. Please check our website for latest information. 05.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 HIGH CURRENT POWER INDUCTORS 7. RELIABILITY AND TEST CONDITION : SSL1005 SERIES ITEM Electrical Characteristics Test Inductance DCR Heat Rated Current (Irms) PERFORMANCE Refer to standard electrical characteristics list TEST CONDITION HP4284A, CH11025, CH3302, CH1320, CH1320S LCR meter. CH16502, Agilent33420A Micro-Ohm Meter. Irms(A) will cause the coil temperature rise approximately ǻT=40°C without core loss 1. Applied the allowed DC current 2. Temperature measured by digital surface thermometer Isat(A) will cause Lo to drop approximately 20% Saturation Current (Isat) Mechanical Performance Test Solderability Test More than 90% of the terminal electrode should be covered with solder. Preheating Dipping 230°C Natural cooling Preheat : 150°C, 60sec. Solder : Sn-Ag3.0-Cu0.5 Solder Temperature : 230±5°C Flux for lead free : rosin Dip Time : 4±1sec. 150°C 60 seconds 4±1 seconds Solder Heat Resistance 1. Appearance : No significant abnormality 2. Inductance change : Within ±20% Preheating 260°C Dipping Natural cooling Preheat : 150°C, 60sec. Solder : Sn-Ag3.0-Cu0.5 Solder Temperature : 260±5°C Flux for lead free : rosin Dip Time : 10±0.5sec. 150°C 60 seconds 10±0.5 seconds Reliability Test High Temperature Life Test Low Temperature Life Test Thermal Shock Temperature : 125±5°C Time : 500±12 hours Measure at room temperature after placing for 2 to 3 hrs. 1. Appearance : No damage 2. Inductance : Within ±20% of initia […]

3 page
image

SSL1005 Datasheet


This entry was posted in Uncategorized. Bookmark the permalink.