AD5384 Datasheet PDF

Part Number : AD5384

Function : 40-Channel, 3 V/5 V, Single-Supply, Serial, 14-Bit denseDAC

Manufacturers : Analog Devices

Pinouts :

AD5384 datasheet

Description :

The AD5384 is a complete single-supply, 40-channel, 14-bitdigital-to-analog converter (DAC) available in a 100-ball CSP_BGA package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. The AD5384 includes an internal 1.25 V/2.5 V, 10 ppm/°C reference, an on-chip channel monitor function that multiplexes the analog outputs to a common MON_OUT pin for external monitoring, and an output amplifier boost mode that allows the amplifier slew rate to be optimized. The AD5384 contains a serial interface compatible with SPI,QSPI, MICROWIRE, and DSP interface standards withinterface speeds in excess of 30 MHz and an I2C-compatible interface supporting 400 kHz data transfer rate. An input register followed by a DAC register provides double buffering, allowing the DAC outputs to be updated independently or simultaneously, using the LDAC input. Each channel has a programmable gain and offset adjust register letting the user
fully calibrate any DAC channel. Power consumption is typically 0.25 mA per channel with boost mode off.

Guaranteed monotonic
Relative accuracy (INL): ±4 LSB maximum
On-chip 1.25 V/2.5 V, 10 ppm/°C reference
Temperature range: −40°C to +85°C
Rail-to-rail output amplifier
Package type: 100-ball CSP_BGA
User interfaces
Serial (SPI-/QSPI™-/MICROWIRE®-/DSP-compatible,
featuring data readback)

Channel monitor
Simultaneous output update via LDAC
Clear function to user programmable code
Amplifier boost mode to optimize slew rate
User programmable offset and gain adjust
Toggle mode enables square wave generation
Thermal monitor

Variable optical attenuators (VOAs)
Level settings (automatic test equipment [ATE])
Optical micro-electromechanical systems (MEMS) control

AVDDx = 4.5 V to 5.5 V; DVDDx = 2.7 V to 5.5 V, AG N Dx = DGND = 0 V; external REF_IN = 2.5 V; all specifications TMIN to TMAX, unless
otherwise noted. The AD5384 is calibrated using an external 2.5 V reference. Temperature range−40°C to +85°C.

AD5384 Datasheet PDF Download

AD5384 pdf

Other data sheets within the file :