AD590JF Datasheet – Temperature Transducer – AD

Part Number : AD590JF, AD590JH, AD590JR

Function : 2-Terminal IC Temperature Transducer

Package : 2-Lead FLATPACK, 4-Lead LFCSP, 3-Pin TO-52, 8-Lead SOIC type

Manufacturers : Analog Devices

Image :

Description :

The AD590 is a 2-terminal integrated circuit temperature transducer that produces an output current proportional to absolute temperature. For supply voltages between 4 V and 30 V, the device acts as a high impedance, constant current regulator passing 1 μA/K. Laser trimming of the chip’s thin-film resistors is used to calibrate the device to 298.2 μA output at 298.2 K (25°C).
The AD590 should be used in any temperature-sensing application below 150°C in which conventional electrical temperature sensors are currently employed. The inherent low cost of a monolithic integrated circuit combined with the elimination of support circuitry makes the AD590 an attractive alternative for many temperature measurement situations. Linearization circuitry, precision voltage amplifiers, resistance measuring circuitry, and cold junction compensation are not needed in applying the AD590.



1. The AD590 is a calibrated, 2-terminal temperature sensor requiring only a dc voltage supply (4 V to 30 V). Costly transmitters, filters, lead wire compensation, and linearization circuits are all unnecessary in applying the device.

2. State-of-the-art laser trimming at the wafer level in conjunction with extensive final testing ensures that
AD590 units are easily interchangeable.

3. The AD590 is electrically durable: it withstands a forward voltage of up to 44 V and a reverse voltage of 20 V. Therefore, supply irregularities or pin reversal does not damage the device.


AD590JF PDF Datasheet Download