Part Number : AD8099
Function : Ultralow Distortion, High Speed 0.95 nV/√Hz Voltage Noise Op Amp
Package : LFSO, SOIC 8 Pin Type
Manufacturers : Analog Devices
The AD8099 is an ultralow noise (0.95 nV/√Hz) and distortion (–92 dBc @10 MHz) voltage feedback op amp, the combination of which make it ideal for 16- and 18-bit systems. The AD8099 features a new, highly linear, low noise input stage that increases the full power bandwidth (FPBW) at low gains with high slew rates. ADI’s proprietary next generation XFCB process enables such high performance amplifiers with relatively low power.
1. Ultralow noise: 0.95 nV/√Hz, 2.6 pA/√Hz
2. High speed
3. New pinout
4. Custom external compensation, gain range –1, +2 to +10
5. Supply current : 15 mA
6. Offset voltage : 0.5 mV max
7. Wide supply voltage range : 5 V to 12 V
5. IF and baseband amplifiers
6. A-to-D drivers
7. DAC buffers
8. Optical electronics
SPECIFICATIONS WITH ±5 V SUPPLY
TA = 25°C, G = +2, RL = 1 kΩ to ground, unless otherwise noted. Refer to Figure 60 through Figure 66 for component values and gain configurations.
SPECIFICATIONS WITH +5 V SUPPLY
VS = 5 V @ TA = 25°C, G = +2, RL = 1 kΩ to midsupply, unless otherwise noted. Refer to Figure 60 through Figure 66 for component values and gain configurations.
Other data sheets within the file :
AD8099ACPI-EBZ, AD8099ACPN-EBZ, AD8099ACPZ-R2, AD8099ACPZ-REEL