Part Number: ICE3BS02
Function: Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell
Package: DIP, SO 8 Pin type
Manufacturer: Infineon Technologies
Images :
Description:
The F3 Controller provides Active Burst Mode to reach the lowest Standby Power Requirements <100mW at no load. As the controller is always active during Active Burst Mode, there is an immediate response on load jumps without any black out in the SMPS. In Active Burst Mode the ripple of the output voltage can be reduced <1%.
Pinouts:
Features:
1. 500V Startup Cell switched off after Start Up
2. Active Burst Mode for lowest Standby Power @ light load controlled by Feedback Signal
3. Fast load jump response in Active Burst Mode
4. 100/67kHz internally fixed switching frequency
5. Auto Restart Mode for Overtemperature Detection
6. Auto Restart Mode for VCC Overvoltage Detection
7. Internal PWM Leading Edge Blanking
8. Soft switching for low EMI
ICE3BS02 Datasheet PDF Download
Other data sheets are available within the file: ICE3AS02, ICE3AS02G, ICE3BS02G, Q67040-S4637-A101