LM124AJ Datasheet PDF

Part Number : LM124AJ


Manufacturers : Texas Instruments

Pinouts :

LM124AJ datasheet

Description :


These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2902 device), and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.

Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems. For example, the LM124 device can be operated directly from the standard 5-V supply that is used in digital systems and provides the required interface electronics, without requiring additional ±15-V supplies.


2-kV ESD Protection for: LM224K, LM224KA
LM324K, LM324KA
LM2902K, LM2902KV, LM2902KAV

Wide Supply Ranges Single Supply: 3 V to 32 V (26 V for LM2902)
Dual Supplies: ±1.5 V to ±16 V
(±13 V for LM2902)

Low Supply-Current Drain Independent of
Supply Voltage: 0.8 mA Typ
Common-Mode Input Voltage Range Includes Ground,
Allowing Direct Sensing Near Ground
Low Input Bias and Offset Parameters Input Offset Voltage: 3 mV Typ
A Versions: 2 mV Typ
Input Offset Current: 2 nA Typ
Input Bias Curren: 20 nA Typ
A Versions: 15 nA Typ

Differential Input Voltage Range Equal
to Maximum-Rated Supply Voltage: 32 V
(26 V for LM2902)
Open-Loop Differential Voltage Amplification:
100 V/mV Typ
Internal Frequency Compensation
On Products Compliant to MIL-PRF-38535, All
Parameters Are Tested Unless Otherwise Noted.
On All Other Products, Production Processing
Does Not Necessarily Include Testing of All

LM124AJ Datasheet PDF Download

LM124AJ pdf

Other data sheets within the file :