Part Number: LM32P10
Function: 4.7 inch, Medium Size Graphic Type LCD Module
Active area (H x V) : 96.0 x 72.0 mm
Manufacturer: Sharp
Image
Description
The SHARP LM32P10 Passive Matrix Color LCD consists of 320 x 240 dots with a backlight system which uses a cold cathode fluorescent tube (CCFT).
The LCD also consists of a TSTN-type negative panel.
Features
1. Display Format : 320 x 240
2. Overall Dimensions : 148 (W) x 96 (H) x 8 max (D) mm
3. Active Area : 100 (W) x 76 (H) mm
4. Dot Pitch : 0.28 (W) x 0.28 (H) mm
Pinout
PIN
1 S Scan Start-Up Signal H
2 CP1 Input Data Latch Signal H ® L
3 CP2 Data Input Clock Signal H ® L
4 VDD Power Supply For Logic and LCD (+5 V) –
5 VSS Ground Potential (GND) –
6 VEE Power Supply For LCD –
7 D0 Display Data Signal H (ON), L (OFF)
8 D1 Display Data Signal H (ON), L (OFF)
9 D2 Display Data Signal H (ON), L (OFF)
10 D3 Display Data Signal H (ON), L (OFF)
11 VR1 LCD Contrast Adjust (A)
12 VR2 LCD Contrast Adjust (B)
Display Face Configuration
The LCD driver is 80 bits LSI, consisting of shift register, latch circuits, and LCD driver circuits. Display data which is externally divided into data for each row (320 dots) is sequentially transferred in the form of 4-bit parallel data through shift registers by Clock Signal CP2 from the left top of the display face.
When data of one row (320 dots) has been input, they are latched in the form of parallel data for 320 lines of signal electrodes by Latch Signal CP1. Then the corresponding drive signal is transmitted to the 320 lines of column electrodes of the LCD panel by the LCD drive circuits.
LM32P10 Datasheet
Other data sheets are available within the file:
