OB2262AP Datasheet – Current Mode PWM Controller – On-Bright

Part Number: OB2262AP

Function: Highly integrated current mode PWM control IC

Package: DIP-8 Pin Type

Manufacturer: On-Bright Electronics

Image

OB2262AP pwm controller

Description

OB2262AP is a highly integrated current mode PWM control IC optimized for high performance, low standby power and cost effective offline flyback converter applications in sub 30W range. PWM switching frequency at normal operation is externally programmable and trimmed to tight range. At no load or light load condition, the IC operates in extended ‘burst mode’ to minimize switching loss. Lower standby power and higher conversion efficiency is thus achieved. VDD low startup current and low operating current contribute to a reliable power on startup design with OB2262. A large value resistor could thus be used in the startup circuit to minimize the standby power.

 

Pinouts:

OB2262AP datasheet pinout

Features

1. Extended Burst Mode Control For Improved Efficiency and Minimum Standby Power Design

2. Audio Noise Free Operation

3. External Programmable PWM Switching Frequency

4. Good Protection Coverage With Auto Self Recovery

5. Internal Synchronized Slope Compensation

6. Low VDD Startup Current and Low Operating Current (1.4mA)

7. Leading Edge Blanking on Current Sense Input

 

OB2262AP Datasheet

 

Related articles across the web