The ADXL150 and ADXL250 are third generation ±50g surface micromachined accelerometers. These improved replacements for the ADXL50 offer lower noise, wider dynamic range,reduced power consumption and improved zerogbias drift.The ADXL150 is a single axis product; the ADXL250 is a fully integrated dual axis accelerometer with signal conditioning on a single monolithic IC, the first of its kind available on the commercial market. The two sensitive axes of the ADXL250 are orthogonal (90°) to each other. Both devices have their sensitive axes in the same plane as the silicon chip.
1. Complete Acceleration Measurement System on a Single Monolithic IC 2. 80dB Dynamic Range 3. Pin Programmable +-50g or +-25g Full Scale 4. Low Noise : 1 mg/√HzTypical 5. Low Power: <2 mA per Axis 6. Supply Voltages as Low as 4 V 7. 2-Pole Filter On-Chip 8. Ratiometric Operation 9. Complete Mechanical & Electrical Self-Test 10. Dual & Single Axis Versions Available 11. Surface Mount Package
Other data sheets within the file : ADXL150AQC, ADXL150JQC, ADXL250, ADXL250AQC
Function : Low Power, Low Profile ±2 gDual Axis Accelerometer with I2C Interface
Package : 5mm X 5mm X 1.55mm LCC Type
Manufacturers : MEMSIC, Inc
The MXC6202G/H/M/Nare low cost, dual axis accelerometers fabricated on a standard, submicron CMOS process. It is a complete sensingsystemwithon-chip mixed signalprocessing and integrated I2C bus, allowing the device to be connected directly to a microprocessor eliminating the need for A/D converters or timing resources.
1. RoHS compliant 2. I2C Slave, FAST (≤400 KHz.) mode interface 3. 1.8V compatible IO 4. Embedded Power up/down and self-test function 5. On-chip temperature sensor available 6. Eight customer defined 7-bit addresses 7. 2.7 V to 3.6 V single supply continuous operation 8. Monolithic CMOS IC 9. Low power consumption: typically <2 mA @ 3.0 V 10. Resolution better than 1 milli-g 11. On chip mixed signal processing