LF353N Datasheet – Quad Operational Amplifier

Part Number : LF353N

Function : Quad Operational Amplifier, Internally Compensated, JFET Input

Package : DIP, SOP 8 Pin Type

Manufacturers : ON Semiconductor

Pinouts :

LF353N datasheet


Description :

These low cost JFET input operational amplifiers combine two state–of–the–art analog technologies on a single monolithic integrated circuit. Each internally compensated operational amplifier has well matched high voltage JFET input devices for low input offset voltage. The JFET technology provides wide bandwidths and fast slew rates with low input bias currents, input offset currents, and supply currents.


1. Input Offset Voltage of 5.0 mV Max (LF347B)
2. Low Input Bias Current: 50 pA
3. Low Input Noise Voltage: 16 nV/ Hz
4. Wide Gain Bandwidth: 4.0 MHz
5. High Slew Rate: 13V/µs
6. Low Supply Current: 1.8 mA per Amplifier
7. High Common Mode and Supply Voltage Rejection Ratios: 100 dB

Other data sheets within the file : LF347BN, LF351D, LF351DR2, LF351N

LF353N Datasheet PDF Download

LF353N pdf


AD8099 Datasheet – Voltage Noise Op Amp

Part Number : AD8099

Function : Ultralow Distortion, High Speed 0.95 nV/√Hz Voltage Noise Op Amp

Package : LFSO, SOIC 8 Pin Type

Manufacturers : Analog Devices

Pinouts :

AD8099 datasheet


Description :

The AD8099 is an ultralow noise (0.95 nV/√Hz) and distortion (–92 dBc @10 MHz) voltage feedback op amp, the combination of which make it ideal for 16- and 18-bit systems. The AD8099 features a new, highly linear, low noise input stage that increases the full power bandwidth (FPBW) at low gains with high slew rates. ADI’s proprietary next generation XFCB process enables such high performance amplifiers with relatively low power.


1. Ultralow noise: 0.95 nV/√Hz, 2.6 pA/√Hz
2. High speed
3. New pinout
4. Custom external compensation, gain range –1, +2 to +10
5. Supply current : 15 mA
6. Offset voltage : 0.5 mV max
7. Wide supply voltage range : 5 V to 12 V


1. Pre-amplifiers
2. Receivers
3. Instrumentation
4. Filters
5. IF and baseband amplifiers
6. A-to-D drivers
7. DAC buffers
8. Optical electronics

TA = 25°C, G = +2, RL = 1 kΩ to ground, unless otherwise noted. Refer to Figure 60 through Figure 66 for component values and gain configurations.

VS = 5 V @ TA = 25°C, G = +2, RL = 1 kΩ to midsupply, unless otherwise noted. Refer to Figure 60 through Figure 66 for component values and gain configurations.

Other data sheets within the file :


AD8099 Datasheet PDF Download

AD8099 pdf