MAX19711 Datasheet – 10-Bit, Full-Duplex Analog Front-End

Part Number : MAX19711

Function : 10-Bit, 11Msps, Full-Duplex Analog Front-End

Package : Miniature 56-Pin Thin QFN Type (7mm x 7mm x 0.8mm)

Manufacturers : Maxim Integrated

Pinouts :

MAX19711 datasheet

 

Description :

The MAX19711 is an ultra-low-power, highly integrated mixed-signal analog front-end (AFE) ideal for CDMA communication applications operating in full-duplex (FD) mode. Optimized for high dynamic performance and ultra-low power, the device integrates a dual 10-bit, 11Msps receive (Rx) ADC; dual 10-bit, 11Msps transmit (Tx) DAC with CDMA baseband filters; three fast-settling 12-bit aux-DAC channels for ancillary RF front-end control; and a 10-bit, 333ksps housekeeping aux-ADC. The typical operating power in FD mode is 37.5mW/42.7mW at a 4.915MHz/11MHz clock frequency.

The Rx ADCs feature 54.8dB SNR and 74.2dBc SFDR at 1.875MHz input frequency with an 11MHz clock frequen cy. The analog I/Q input amplifiers are fully differential and accept 1.024VP-Pfull-scale signals. Typical I/Q channel matching is ±0.01°phase and ±0.01dB gain.

Features :

1. Dual 10-Bit, 11Msps Rx ADC and Dual 10-Bit, 11Msps Tx DAC

2. Ultra-Low Power –  Low-Current Standby and Shutdown Modes

3. Integrated CDMA Filters with > 64dBc Stopband Rejection

4. Programmable Tx DAC Common-Mode DC Level and I/Q Offset Trim

5.Three 12-Bit, 1µs Aux-DACs

6. 10-Bit, 333ksps Aux-ADC with 4:1 Input Mux and Data Averaging

7. Multiplexed Parallel Digital I/O

8. Serial-Interface Control

Other data sheets within the file : MAX19711ETN, MAX19711ETN+

MAX19711 Datasheet PDF Download


MAX19711 pdf

HC4053 Datasheet – Analog Multiplexer / Demultiplexer – NXP

Part Number : HC4053, 74HC4053, 74HCT4053

Function : Triple 2-channel analog multiplexer/demultiplexer

Image :

HC4053 Image

Pinouts :

HC4053 Pinout

Description :

The 74HC4053; 74HCT4053 is a high-speed Si-gate CMOS device and is pin compatible
with the HEF4053B. It is specified in compliance with JEDEC standard no. 7A.

The 74HC4053; 74HCT4053 is triple 2-channelanalog multiplexer/demultiplexer with a common enable input (E). Each multiplexer/demultiplexer has two independent inputs/outputs (nY0 and nY1), a common input/output (nZ) and three digital select inputs (Sn). With ELOW, one of the two switches is selected (low-impedance ON-state) by S1 to S3. With EHIGH, all switches are in the high-impedance OFF-state, independent of S1 to S3.

HC4053 Datasheet

HC4053 Datasheet

 

Related articles across the web