MXC6202 Datasheet PDF – Dual Axis Accelerometer

Part Number : MXC6202

Function : Low Power, Low Profile ±2 gDual Axis Accelerometer with I2C Interface

Package : 5mm X 5mm X 1.55mm LCC Type

Manufacturers : MEMSIC, Inc

Pinouts :

MXC6202 datasheet


Description :

The MXC6202G/H/M/Nare low cost, dual axis accelerometers fabricated on a standard, submicron CMOS process. It is a complete sensingsystemwithon-chip mixed signalprocessing and integrated I2C bus, allowing the device to be connected directly to a microprocessor eliminating the need for A/D converters or timing resources.


1. RoHS compliant
2. I2C Slave, FAST (≤400 KHz.) mode interface
3. 1.8V compatible IO
4. Embedded Power up/down and self-test function
5. On-chip temperature sensor available
6. Eight customer defined 7-bit addresses
7. 2.7 V to 3.6 V single supply continuous operation
8. Monolithic CMOS IC
9. Low power consumption: typically <2 mA @ 3.0 V
10. Resolution better than 1 milli-g
11. On chip mixed signal processing


1. Information Appliances – Cell Phones, PDA’s, Computer Peripherals, Mouse, Smart Pens
2. Consumer – LCD Projectors, Pedometers, Blood Pressure Monitor, Digital Cameras
3. Gaming – Joystick/RF Interface/Menu Selection/Tilt Sensing
4. GPS – Electronic Compass Tilt Correction, Dead Reckoning Assist


Other data sheets within the file : MXC6202G, MXC6202H, MXC6202M, MXC6202N

MXC6202 Datasheet PDF Download

MXC6202 pdf

BNO055 Datasheet – 9-axis absolute orientation sensor

Part Number : BNO055

Function : 9-axis absolute orientation sensor

Package : LGA package 28 pins

Manufactures : Bosch


BNO055 Datasheet - 9-axis sensor


The BNO055 is a System in Package (SiP), integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope with a range of ±2000 degrees per second, a triaxial geomagnetic sensor and a 32-bit cortex M0+ microcontroller running Bosch Sensortec sensor fusion software, in a single package.

The corresponding chip-sets are integrated into one single 28-pin LGA 3.8mm x 5.2mm x 1.1 mm housing. For optimum system integration the BNO055 is equipped with digital bidirectional I2C and UART interfaces. The I2C interface can be programmed to run with the HID-I2C protocol turning the BNO055 into a plug-and-play sensor hub solution for devices running the Windows 8.0 or 8.1 operating system.

BNO055 pinout

1. Outputs fused sensor data
Quaternion, Euler angles, Rotation vector, Linear acceleration, Gravity, Heading

2. 3 sensors in one device
an advanced triaxial 16bit gyroscope, a versatile, leading edge triaxial 14bit accelerometer and a
full performance geomagnetic sensor

3. Power Management
Intelligent Power Management: normal, low power and suspend mode available

Typical applications
1. Navigation
2. Robotics
3. Fitness and well-being
4. Augmented reality
5. Context awareness
6. Tablets and ultra-books

BNO055 Datasheet