M170EG01 Datasheet – 17 Inch, Color TFT-LCD Module

Part Number : M170EG01

Function : 17 Inch, Color TFT-LCD Module

Physical Size (H x V x D) : 358.5(H) x 296.5(V) Typ. x 15.8(D) Max [mm]

Manufactures : Auo ( AU Optronics )

Image

M170EG01 datasheet LCD

Description :

This specification applies to the 17 inch Color TFT-LCD Module M170EG01.

The display supports the W SXGA+ (1280(H) x 1024(V)) screen format and 16.7M colors (RGB 6-bits+Hi-RFC data). All input signals are 2 Channel LVDS interface compatible. This module does not contain an inverter card for backlight.

Display Characteristics

1. Screen Diagonal [mm] : 432 (17.0”)
2. Active Area [mm] : 337.920(H) × 270.336(V)
3. Pixels H x V : 1280 × 3(RGB) × 1024
4. Pixel Pitch [mm] : 0.264(per one triad) × 0.264
5. Pixel Arrangement : R.G.B. Vertical Stripe
6. Display Mode : Normally White
7. White Luminance [cd/m2] : 650 (center,Typ)@7.5 mA
8. Contrast Ratio : 800 : 1 (Typ)
9. Power Consumption [Watt] : 25.8 W (Typ)
10. Weight [Grams] : 2100 Max.

Pinouts :

The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a
differential signal technology for LCD interface and high speed data transfer device. Transmitter shall be SN75LVDS83(negative edge sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels while the second LVDS port(RxExxx) transmits even pixels.

1 RxO0- Negative LVDS differential data input (Odd data)
2 RxO0+ Positive LVDS differential data input (Odd data)
3 RxO1- Negative LVDS differential data input (Odd data)
4 RxO1+ Positive LVDS differential data input (Odd data)
5 RxO2- Negative LVDS di fferential data input (Odd data, H -Sync,V-Sync,DSPTMG)
6 RxO2+ Positive LVDS differential data input (Odd data, H -Sync,V-Sync,DSPTMG)
7 GND Power Ground
8 RxOC- Negative LVDS differential clock input (Odd clock)
9 RxOC+ Positive LVDS differential clock input (Odd clock)
10 RxO3- Negative LVDS differential data input (Odd data)
11 RxO3+ Positive LVDS differential data input (Odd data)
12 RxE0- Negative LVDS differential data input (Even clock)
13 RxE0+ Positive LVDS differential data input (Even data )
14 GND Power Ground
15 RxE1- Positive LVDS differential data input (Even data)
16 RxE1+ Negative LVDS differential data input (Even data)
17 GND Power Ground
18 RxE2- Negative LVDS differential data input (Even data)
19 RxE2+ Positive LVDS differential data input (Even data)
20 RxEC- Negative LVDS differential clock input (Even clock)
21 RxEC+ Positive LVDS differential clock input (Even clock)
22 RxE3- Negative LVDS differential data input (Even data)
23 RxE3+ Positive LVDS differential data in put (Even data)
24 GND Power Ground
25 GND Power Ground
26 NC No contact (For AUO test only)
27 GND Power Ground
28 VCC +5.0V Power Supply
29 VCC +5.0V Power Supply
30 VCC +5.0V Power Supply

 

Other data sheets within the file : M170EG-01

M170EG01 Datasheet PDF Download

 M170EG01 pinout

 

CT-F2125LN Datasheet PDF – Color TV Manual – Panasonic

Part Number : CT-F2125LN

Function : Manual Service for TV – Televison

Manufacturers : Panasonic Corporation

Image :

CT-F2125LN datasheet

 

Description :

This receiver uses electronic technology with the concept of collective line between integrated circuits (I2C bus). The system has control functions and replaces some controls mechanics Instead of adjusting the mechanical controls individually, now many of the functions will be adjusted to through the on-screen menu. (service mode).

The adjustment of this control is important for the due operation of user controls for brightness and image. Do not adjust the variable screen resistor (SCREEN) located on the flyback, until the sub-brightness is adjusted. This control is preset at the factory. It should not be adjusted unless associated circuits have been repaired, the CRT card or when the CRT is replaced.

Other data sheets within the file : CTF2125LN, CT-F2125N, CTF2125N

CT-F2125LN Datasheet PDF Download