BYX71 Datasheet PDF – Fast Soft-Recovery Rectifier Diode

Part Number : BYX71

Function : Fast Soft-Recovery Rectifier Diode

Package :  SOD-38 Type

Manufacturers : ETC

Images :

BYX71 datasheet diode

Description :

Silicon double-diffused rectifier diodes in plastic envelopes. They are intended for use in chopper applications as well as switched-mode power supplies, as efficiency diodes and scan rectifiers in television receivers. The devices featurenon-snap-off characteristics. Normal and reverse polarity types are available.

Pinout :

BYX71 pinout diode

Mechanical Data

1. Net mass : 2,5 g
2. Recommended diameter of fixing screw : 3,5 mm
3. Torque on screw
when using washer and heats ink compound:

(1) min. 0,95 Nm (9,5 kg cm)
(2) max. 1,5 Nm (15 kg cm)



1. Soldered joints must be at least 2,5 mm from the seal.
2. The maximum permissible temperature of the soldering iron or bath is 270 °C;
contact with the joint must not exceed 3 seconds.
3. The device should not be immersed in oil, and few potting resins are suitable for
re-encapsulation. Advice on these materials is available on request.
4. Leads should not be bent less than 2,5 mm from the seal; exert no axial pull when
5. For good thermal contact heatsink compound should be used between base-plate and
heats ink.

Other data sheets within the file : BYX71-350, BYX71-600, BYX71-350R, BYX71-600R

BYX71 Datasheet PDF

BYX71 pdf


1N4004 Datasheet – 1A, 400V, Rectifier, Diode

Part Number : 1N4004

Function : 1.0A, 400V, Axial-Lead Glass Passivated Standard Recovery Rectifier

Package : DO-204AL ( DO-41 ) Type

Manufacturers : ON Semiconductor



This data sheet provides information on subminiature size, axial lead mounted rectifiers for general−purpose low−power applications.


1. Shipped in Plastic Bags, 1000 per bag
2. Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to the part number
3. Available in Fan−Fold Packaging, 3000 per box, by adding a “FF” suffix to the part number
4. Pb−Free Packages are Available

Mechanical Characteristics

1. Case : Epoxy, Molded
2. Weight : 0.4 gram (approximately)
3. Finish : All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
4. Lead and Mounting Surface Temperature for Soldering Purposes :  260°C Max. for 10 Seconds, 1/16 in. from case
5. Polarity : Cathode Indicated by Polarity Band

Absolute maximum ratings

1N4004 IN4004 1N4OO4

Absolute Maximum Ratings : Vrrm

1N4001 : 50 V
1N4002 : 100 V
1N4003 : 200 V
1N4005 : 600 V
1N4006 : 800 V
1N4007 : 1000 V

1N4004 Datasheet PDF Download

1N4007 pdf