LTA804N Datasheet – HV start-up DCM/QR flyback controller

Part Number: LTA804N

Package: SOP 16 Pin Type

Manufacturer: NXP, Philips

Image:

LTA804N image

LTA804N is Equivalent to TEA1751LT.

The TEA1751LT is the third generation of green Switched Mode Power Supply (SMPS)
controller ICs. The TEA1751LT combines a controller for Power Factor Correction (PFC)
and a flyback controller. Its high level of integration allows the design of a cost-effective
power supply with a very low number of external components.

The special built-in green functions provide high efficiency at all power levels. This
efficiency applies to quasi-resonant operation at high-power levels, quasi-resonant
operation with valley skipping, as well as reduced frequency operation at lower power
levels. At low-power levels, the PFC switches off to maintain high efficiency.
During low-power conditions, the flyback controller switches to frequency reduction mode
and limits the peak current to 25 % of its maximum value. This mode ensures high
efficiency at low-power and good standby power performance while minimizing audible
noise from the transformer.

The TEA1751LT is a Multi-Chip Module, (MCM), containing two chips. The proprietary
high-voltage BCD800 process which makes direct start-up possible from the rectified
universal mains voltage in an effective and green way. The second low voltage
Silicon On Insulator (SOI) is used for accurate, high speed protection functions and
control.

The TEA1751LT enables the design of highly efficient and reliable supplies with power
requirements of up to 250 W using the minimum number of external components.

LTA804N Datasheet

LTA804N Datasheet

Datasheet Download : [ TEA1751.PDF ]

STR W5753A Datasheet PDF – Flyback Switching Regulator

Part Number: STR W5753A

Function: Flyback Switching Regulator

Package:  TO-220 6Pin Type

Manufacturer: Allegro, Sanken

Image

STR W5753A datasheet

Description

The STR-W6753 is a quasi-resonant regulator specifically designed to satisfy the requirements for increased integration and reliability in switch-mode power supplies. It incorporates a primary control and drive circuit with an avalanche-rated power MOSFET. The regulator exhibits only low-level high-frequency EMI noise because of soft switching of the MOSFET close to ground (bottom point). A bottom-skip function minimizes an increase of operational frequency during light loads to improve system efficiency over the entire load range.

Pinout
STR W5753A Pinout
Features

1. Auto-Bias Function, Stable Burst Operation Without Generating Interference

2. Internal Off-Timer Circuit

3. Built-In Constant-Voltage Drive

4. Multiple Protections:

(1) Pulse-by-Pulse Overcurrent Protection
(2) Overload Protection with Auto Recovery
(3) Latching Overvoltage Protection
(4) Undervoltage Lockout with Hysteresis

 

STR W5753A Datasheet PDF

 

Other data sheets are available within the file: STR-W5753A

Related articles across the web