NC7WZ14 Datasheet PDF – Dual Inverter

Part Number : NC7WZ14

Function : TinyLogic TM UHS Dual Inverter with Schmitt Trigger Inputs

Package : 6-Lead Type

Manufacturers : Fairchild Semiconductor

Pinouts :

NC7WZ14 datasheet


Description :

The NC7WZ14 is a dual inverter with Schmitt trigger input from Fairchilds Ultra-High Speed (UHS) Series of TinyLogic® in the space saving SC70 6-lead package.

The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range.

The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs and outputs are high-impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage.

Schmitt trigger inputs achieve typically 1V hysteresis between the positive-and negative-going input threshold voltage at 5V.


1. Space saving SC70 6-lead package
2. Ultra small MicroPak leadless package
3. Power down high impedance inputs/outputs
4. Patented noise/EMI reduction circuitry implemented

Other data sheets within the file :  NC7WZ14EP6X, NC7WZ14FHX, NC7WZ14L6X, NC7WZ14P6

NC7WZ14 Datasheet PDF Download

NC7WZ14 pdf


MM74HC14M Datasheet PDF – Hex Inverting Schmitt Trigger

Part Number : MM74HC14M ( SOIC Type )

Function : Hex Inverting Schmitt Trigger

Package : DIP, SIP, TSSOP 14 pin Type

Manufacturers : Fairchild Semiconductor


MM74HC14M Datasheet PDF


General Description

The MM74HC14 utilizes advanced silicon-gate CMOS technology to achieve the low power dissipation and high noise immunity of standard CMOS, as well as the
capability to drive 10 LS-TTL loads.

The 74HC logic family is functionally and pinout compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to Vcc and ground.

Pinouts :

MM74HC14M pinout


1. Typical propagation delay: 13ns
2. Wide power supply range: 2V–6V
3. Low quiescent current: 20µA maximum (74HC Series)
4. Low input current: 1µA maximum
5. Fanout of 10 LS-TTL loads
6. Typical hysteresis voltage: 0.9V at VCC =4.5V

Other data sheets within the file : MM74HC14, MM74HC14CW, MM74HC14MTC, MM74HC14MTCX

MM74HC14M Datasheet PDF Download

MM74HC14M pdf