RTL8192CE-GR Datasheet PDF – Single-Chip WLAN Controller

Part Number: RTL8192CE-GR, RTL8192CE

Function: SINGLE-CHIP IEEE 802.11b/g/n 2T2R WLAN CONTROLLER w/PCI EXPRESS INTERFACE

Package: 64-pin QFN

Manufacturer: Realtek Semiconductor

Images:

RTL8192CE-GR datasheet controller

Description:

The Realtek RTL8192CE-GR is a highly integrated single-chip MIMO (Multiple In, Multiple Out) Wireless LAN (WLAN) solution for the wireless high throughput 802.11n specification. It combines a MAC, a 2T2R capable baseband, and RF in a single chip. The RTL8192CE provides a complete solution for a high throughput performance wireless client.

The RTL8192CE baseband implements Multiple Input, Multiple Output (MIMO) Orthogonal Frequency Division Multiplexing (OFDM) with 2 transmit and 2 receive paths (2T2R) and is compatible with the IEEE 802.11n specification. Features include two spatial streams transmission, short guard interval (GI) of 400ns, spatial spreading, and transmission over 20MHz and 40MHz bandwidth. Moreover, RTL8192CE provides one spatial stream space-time block code (STBC) to extend the range of transmission. At the receiver, extended range and good minimum sensitivity is achieved by having receiver diversity up to 2 antennas. As the recipient, the RTL8192CE also supports explicit sounding packet feedback that helps senders with beamforming capability. With 2 independent RF blocks, the RTL8192CE can perform fast roaming without link interruption. […]

Pinout

RTL8192CE-GR pinout

General Features:

1. CMOS MAC, Baseband MIMO PHY, and RF in a single chip for IEEE 802.11b/g/n compatible WLAN

2. Complete 802.11n MIMO solution for 2.4GHz band

3. 2×2 MIMO technology for extended reception robustness and exceptional throughput

4. Maximum PHY data rate up to 150Mbps using 20MHz bandwidth, 300Mbps using 40MHz bandwidth

5. Compatible with 802.11n specification

6. Backward compatible with 802.11b/g devices while operating at 802.11n data rates

Host Interface

1. Complies with PCI Express Base Specification Revision 1.1

Standards Supported :

1. IEEE 802.11e QoS Enhancement (WMM, WMM-SA Client mode)

2. IEEE 802.11h TPC, Spectrum Measurement

3. IEEE 802.11k Radio Resource Measurement

4. IEEE 802.11i (WPA, WPA2). Open, shared key, and pair-wise key authentication
services

5. Cisco Compatible Extensions (CCX) for WLAN devices

RTL8192CE-GR Datasheet PDF

ALC887 Datasheet – 7.1 Channel High Definition Audio Codec

This post explains for the semiconductor ALC887, ALC887-GR.

The Package is LQFP-48 Type.

The function of this semiconductor is 7.1 Channel High Definition Audio Codec.

Manufacturer: Realtek Microelectronics

Preview images :

1 page
ALC887 image

Description:

The ALC887 is a 7.1 Channel High Definition Audio Codec with two independent SPDIF outputs.
Featuring eight channels of DAC support 7.1 sound playback, and integrates two stereo ADC that can
support a stereo microphone, and feature Acoustic Echo Cancellation (AEC), Beam Forming (BF), and
Noise Suppression (NS) for voice applications.

ALC887 is designed not only to meet the premium audio performance requirements in current WLP3.10
(Windows Logo Program), but provides better characteristics for future WLP. That brings user real high
fidelity of sound quality. […]

Pinouts

Features

1. Meets premium audio requirements for Microsoft WLP 3.10
2. Meets stricter performance requirements for future WLP
3. High-performance DACs with 97dB Signal-to-Noise Ratio (SNR), ADCs with 90dB SNR
4. Four stereo DACs (8 channels) support 16/20/24-bit PCM format for 7.1 sound playback.
5. Two stereo ADCs (4 channels) support 16/20/24-bit PCM format recording simultaneously
6. All DACs supports 16/20/24-bit, 44.1k/48k/96k/192kHz sample rate
7. All ADCs supports 16/20/24-btt, 44.1k/48k/96k/192kHz sample rate
8. Two independent SPDIF-OUT converters support 16/20/24-bit, 44.1k/48k/88.2k/96k/192kHz sample
rate. One converter for normal SPDIF output, the other outputs an independent digital stream to the
HDMI transmitter

 

ALC887 Datasheet