MPU-6050 Datasheet PDF – Motion Tracking Device

Part Number : MPU-6050

Function : Six-Axis (Gyro + Accelerometer) MEMS MotionTracking™ Devices

Package : 4 mm x 4 mm x 0.9 mm QFN Type

Manufacturers : Invensense, TDK


MPU-6050 datasheet


The MPU-6050 incorporates InvenSense’s MotionFusion and run-time calibration firmware that enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices in motion-enabled products, guaranteeing that sensor fusion algorithms and calibration procedures deliver optimal performance for consumers.



MPU-6050 pinout


1. 9-Axis MotionFusion by the on-chip Digital Motion Processor (DMP)
2. Auxiliary master I2C bus for reading data from external sensors (e.g., magnetometer)
3. 3.9mA operating current when all 6 motion sensing axes and the DMP are enabled
4. VDD supply voltage range of 2.375V-3.46V
5. Flexible VLOGIC reference voltage supports multiple I2C interface voltages (MPU-6050 only)


1. BlurFree technology (for Video/Still Image Stabilization)
2. AirSign technology (for Security/Authentication)
3. TouchAnywhere™ technology (for “no touch” UI Application Control/Navigation)
4. MotionCommand™ technology (for Gesture Short-cuts)
5. Motion-enabled game and application framework
6. InstantGesture™ iG™ gesture recognition
7. Location based services, points of interest, and dead reckoning
8. Handset and portable gaming
9. Motion-based game controllers
10. 3D remote controls for Internet connected DTVs and set top boxes, 3D mice
11. Wearable sensors for health, fitness and sports
12. Toys

Other data sheets within the file : MPU-6000, MPU6000, MPU6050

MPU-6050 Datasheet PDF Download

MPU-6050 pdf

LJ12A3-4-Z Datasheet PDF – Inductive Proximity Sensor

Part Number : LJ12A3-4-Z

Function : Inductive Proximity Sensor Switch

Package : Module Type

Manufacturers : ETT


LJ12A3-4-Z datasheet sensor

Description :

Inductive type prox switch with NPN Normally Open transistor switch. Output upon detection.


1. Detection distance : 4mm
2. Setting distance : 0-3.2 mm
3. Supply voltage : 6-36Vdc, 5Vdc; 90-250Vac, 36Vac, 380Vac, 50/60Hz
4 .Output current DC type : 300mA max; AC Type: 400mA
5. Standard detected object : Mild steel (12x12x1mm)
6. Sensing object Magnetic metals (if it is not magnetic metals, the sensing distance would decrease)
Response frequency : 500Hz
7. Matched mounting bracket : M12 mounting bracket
8. Output indication : Red LED
9. Short-circuit protection : No
10. Reverse connection protection : Yes
11. Insulation resistance : 50MΩ min (between charging part and housing)
12. Dielectric strength : 1000Vac, 1min (between charging part and housing)
13. IP Rating : IP65
14. Operating temperature : -25 to 70 °C (13 to 158 °F)

Reference Video :

Pinout and Circuits

LJ12A3-4-Z arduino


Other data sheets within the file : LJ12A3-4-Z/BY

LJ12A3-4-Z Datasheet PDF

LJ12A3-4-Z pdf