VI-243CV Datasheet PDF – DC-DC Converter – Vicor

Part Number : VI-243CV

Function : DC-DC Converter

Package : Module Type

Manufacturers : Vicor Corporation

Image :

VI-243CV datasheet


Description :

The VI-200 family, with over 14 million units shipped, is Vicor’s broad series of “zero-current-switching” component-level DC-DC converters. Operating at frequencies up to 2MHz, VI-200 family converters offer exceptional power density, efficiency, noise performance, reliability and ease of use. Booster modules (VI-Bxx) provide a simple, cost-effective, off-the-shelf solution for higher power output requirements. One or more boosters may be used to create synchronous arrays capable of supplying several kilowatts of output power.

Part Number, Ordering Information

VI-243CV DC DC Converter Vicor

Features & Benefits

1. Isolated output
2. Up to 50W/in3
3. cURus, cTÜVus
4. Up to 90% efficiency
5. Size: 4.6” x 2.4” x 0.5” (116,8 x 61,0 x 12,7mm)
6. Remote sense and current limit
7. OVP, thermal shutdown
8. Logic disable
9. Wide range output adjust
10. Compatible power booster modules
11. ZCS power architecture
12. Low noise FM control

Other data sheets within the file : VI-25KIV, VI-J7ZMM, VI-JN0CM, VI-JN1CM

VI-243CV Datasheet PDF Download

VI-243CV pdf

28LV64A Datasheet PDF

Part Number : 28LV64A

Function : 64K (8Kx8) low voltage CMOS EEPROM

Manufacturers : Microchip Technology

Pinouts :

28LV64A datasheet

Description :

The Microchip Technology Inc. 28LV64A is a CMOS 64K non-volatile electrically Erasable PROM organized as 8K words by 8 bits.

The 28LV64A is accessed like a static RAM for the read or write cycles without the need of external components. During a “byte write”, the address and data are latched internally, freeing the microprocessor address and data bus for other operations. Following the initiation of write cycle, the device will go to a busy state and automatically clear and write the latched data using an internal control timer.

28LV64A Datasheet PDF Download

28LV64A pdf

Other data sheets within the file :