This post describes for the semiconductor TD1583.
The Part Number is TD1583, TD1583P, TD1583PR. The package is SOP-8 pin type
The function of this semiconductor is 3A 380Khz 28V PWM Buck DC/DC Converter.
The manufacturer of this part is Techcode.
See the preview image and the PDF file for more information.
The TD1583 is a 380 KHz fixed frequency monolithic step down switch mode regulator
with a built in internal Power MOSFET. It achieves 3A continuous output current over a
wide input supply range with excellent load and line regulation.
The device includes a voltage reference, oscillation circuit, error amplifier, internal
PMOS and etc. The PWM control circuit is able to adjust the duty ratio linearly from 0 to 100%. An enable
function, an over current protection function and a short circuit protection function are built inside. An internal compensation block is built in to minimize external component count.
3A Constant Output Current
80mΩ RDSON Internal Power PMOSFET Switch
Up to 95% Efficiency
Fixed 380KHz Frequency
Wide 3.6V to 28V Input Voltage Range
Output Adjustable from 1.222V to 26V
Built in Frequency Compensation
Built in Thermal Shutdown Function
Built in Current Limit Function
Pin Number Pin Name Description
1,6, 8 NC Not Connect.
Supply Voltage Input Pin. TD1583 operates from a 3.6V to 28V
DC voltage. Bypass Vin to GND with a suitably large capacitor
to eliminate noise on the input.
3 SW Power Switch Output Pin. SW is the switch node that supplies
power to the output.
Ground Pin. Care must be taken in layout. This pin should be
placed outside of the Schottky Diode to output capacitor ground
path to prevent switching current spikes from inducing voltage
noise into TD1583.
Feedback Pin. Through an external resistor divider network, FB
senses the output voltage and regulates it. The feedback
threshold voltage is 1.222V.
Enable Pin. EN is a digital input that turns the regulator on or
off.Drive EN pin high to turn on the device, drive it low to turn