TMS320F241 Datasheet PDF

Part Number : TMS320F241


Manufacturers : Texas Instruments

Pinouts :

TMS320F241 datasheet

Description :

The TMS320F243 and TMS320F241 devices are members of the 24x generation of digital signal processor(DSP) controllers based on the TMS320C2000platform of 16-bit fixed-point DSPs. The F243 is a superset of the F241. These two devices share similar core and peripherals with some exceptions. For example, the F241
does not have an external memory interface. This new family is optimized for digital motor /motion control applications. The DSP controllers combine the enhanced TMS320DSP family architectural design of the C2xx core CPU for low-cost, high-performance processing capabilities and several advanced peripherals
optimized for motor /motion control applications. These peripherals include the event manager module, which provides general-purpose timers and PWM registers to generate PWM outputs, and a single,10-bit analog-to-digital converter (ADC), which can perform conversion within 1 µs.

High-Performance Static CMOS Technology
Includes the TMS320C2xx Core CPU
− Object-Compatible With the TMS320C2xx
− Source-Code-Compatible With TMS320C25
− Upwardly Compatible With TMS320C5x
− 50-ns Instruction Cycle Time Commercial and Industrial Temperature Available
− 544 Words x 16 Bits of On-Chip Data/Program Dual-Access RAM(DARAM)
− 8K Words x 16 Bits of Flash EEPROM
− 224K Words x 16 Bits of Total Memory
Address Reach (F243 only)
External Memory Interface (F243 only)
Event-Manager Module
− Eight Compare/Pulse-Width Modulation
(PWM) Channels
− Two 16-Bit General-Purpose Timers With Four Modes, Including Continuous
Upand Up/Down Counting
− Three 16-Bit Full Compare Units With Deadband
− Three Capture Units (Two WithQuadrature Encoder-Pulse Interface
Single 10-Bit Analog-to-Digital Converter(ADC) Module With 8 Multiplexed Input

Controller Area Network (CAN) Module
26 Individually Programmable, Multiplexed
General-Purpose I/O (GPIO) Pins
Six Dedicated GPIO Pins (F243 only)
Phase-Locked-Loop (PLL)-Based Clock
Watchdog (WD) Timer Module
Serial Communications Interface (SCI)
16-Bit Serial Peripheral Interface (SPI)
Five External Interrupts (Power Drive
Protection, Reset, NMI, and Two Maskable
Three Power-Down Modes for Low-Power
Scan-Based Emulation
Development Tools Available:
− Texas Instruments (TI) ANSI C Compiler,
Assembler/Linker, and C-Source
− Full Range of Emulation Products
− Self-Emulation (XDS510)
− Third-Party Digital Motor Control and
Fuzzy-Logic Development Support
144-Pin LQFP PGE Package (F243)
68-Pin PLCC FN Package (F241)
64-Pin QFP PG Package (F241)

TMS320F241 Datasheet PDF Download

TMS320F241 pdf

Other data sheets within the file :