AM29LV160DT-70FI Datasheet – 16 Megabit, Flash Memory

Part Number: AM29LV160DT-70FI

Function: 16 Megabit (2 M x 8-bit/1 M x 16-bit) CMOS 3.0 volt-only boot sector flash memory

Package: 48-Pin Thin Small Outline Package (TSOP)

Manufacturer: Advanced Micro Devices

Image and Pinouts:

AM29LV160DT-70FI datasheet

 

Description

The AM29LV160DT-70FI is a 16 Mbit, 3.0 Volt-only Flash memory organized as 2,097,152 bytes or 1,048,576 words. The device is offered in 48-ball FBGA, 44-pin SO, and 48-pin TSOP packages. The word-wide data (x16) appears on DQ15–DQ0; the byte-wide (x8) data appears on DQ7–DQ0. This device is designed to be programmed in-system with the standard system 3.0 volt VCCsupply. A 12.0 V VPPor 5.0 VCCare not required for write or erase operations. The device can also be programmed in standard EPROM programmers.

The device requires only a single 3.0 volt power supplyfor both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations.  The Am29LV160D is entirely command set compatible with the JEDEC single-power-supply Flash standard. Commands are written to the command register using standard microprocessor write timings. Register contents serve as input to an internal state-machine that controls the erase and programming circuitry. Write cycles also internally latch addresses and data needed for the programming and erase operations. Reading data out of the device is similar to reading from other Flash or EPROM devices.

Features

1. Single power supply operation

(1) Full voltage range: 2.7 to 3.6 volt read and write operations for battery-powered applications

(2) Regulated voltage range: 3.0 to 3.6 volt read and write operations and for compatibility with high performance 3.3 volt microprocessors

Other data sheets are available within the file:

AM29LV160DB-120EC, AM29LV160DB-120EE, AM29LV160DB-120EI,

AM29LV160DB-120FC, AM29LV160DB-120FE

 

AM29LV160DT-70FI Datasheet PDF Download


AM29LV160DT-70FI pdf

TDA7266SA Datasheet – 7W+7W Dual Bridge Amplifier – ST

Part Number: TDA7266SA

Function : 7W+7W DUAL BRIDGE AMPLIFIER

Package: CLIPWATT15 TYPE

Manufacturer: STMicroelectronics

Image

tda7266sa-dual-bridge-amplifier

Description

The TDA7266SA is a dual bridge amplifier specially designed for LCD Monitor, PC Motherboard, TV and
Portable Radio applications.

A dual bridge amplifier, also known as a full bridge amplifier or an H-bridge amplifier, is an electronic circuit that is commonly used to drive loads such as motors, speakers, or other devices that require bidirectional control. It consists of four switching elements (typically transistors) arranged in a bridge configuration.

Pin to pin compatible with: TDA7266S, TDA7266, TDA7266M, TDA7266MA, TDA7266B, TDA7297SA
& TDA7297.

 

Pinout

tda7266sa-datasheet-pinout

 

Features

1. WIDE SUPPLY VOLTAGE RANGE (3.5-18V)
2. MINIMUM EXTERNAL COMPONENTS
– NO SWR CAPACITOR
– NO BOOTSTRAP
– NO BOUCHEROT CELLS
– INTERNALLY FIXED GAIN
3. STAND-BY & MUTE FUNCTIONS
4. SHORT CIRCUIT PROTECTION
5. THERMAL OVERLOAD PROTECTION

Block Diagram

tda7266sa-block-diagram

The operation of a dual bridge amplifier involves switching the transistors in pairs. When one pair of transistors is turned on, it allows current to flow in one direction through the load. When the other pair of transistors is turned on, it allows current to flow in the opposite direction. By controlling the switching timing and duty cycle, the average voltage and current across the load can be adjusted, enabling precise control over its movement or output.

Dual bridge amplifiers find applications in various fields, including robotics, motor control, audio amplification, and power electronics.

TDA7266SA Datasheet

 

Related articles across the web