Part Number: DM0265R, FSDM0265R, DMO265R
Function: Green Mode Fairchild Power Switch
Package: DIP 8 Pin, SOP 8 Pin
Manufacturer: Fairchild Semiconductor
Images:
Description
This is Green Mode Fairchild Power Switch (FPSTM).
Features
• Internal Avalanche Rugged Sense FET • Consumes only 0.65W at 240VAC & 0.3W load with Advanced Burst-Mode Operation • Frequency Modulation for low EMI • Precision Fixed Operating Frequency • Internal Start-up Circuit • Pulse by Pulse Current Limiting • Abnormal Over Current Protection • Over Voltage Protection • Over Load Protection • Internal Thermal Shutdown Function • Auto-Restart Mode • Under Voltage Lockout • Low Operating Current (3mA) • Adjustable Peak Current Limit • Built-in Soft Start OUTPUT POWER TABLE 230VAC ±15%(3) PRODUCT FSDL321 FSDH321 FSDL0165RN FSDM0265RN FSDH0265RN FSDL0365RN FSDM0365RN FSDL0165RL FSDM0265RL FSDH0265RL FSDL0365RL FSDM0365RL Adapter(1)
2 page
Applications:
• SMPS for VCR, SVR, STB, DVD & DVCD • SMPS for Printer, Facsimile & Scanner • Adaptor for Camcorder Description The FSDL0165RN is an integrated Pulse Width Modulator (PWM) and Sense FET specifically designed for high performance offline Switch Mode Power Supplies (SMPS) with minimal external components. This device is an integrated high voltage power switching regulator which combine an avalanche rugged Sense FET with a current mode PWM control block. The integrated PWM controller features include: a fixed oscillator with frequency modulation for reduced EMI, Under Voltage Lock Out (UVLO) protection, Leading Edge Blanking (LEB), optimized gate turn-on/turnoff driver, Thermal Shut Down (TSD) protection, Abnormal Over Current Protection (AOCP) and temperature compensated precision current sources for loop compensation and fault protection circuitry. When compared to a discrete MOSFET and controller or RCC switching converter solution, the FSDL0165RN reduce total component count, design size, weight and at the same time increases efficiency, productivity, and system reliability. This device is a basic platform well suited for cost effective designs of flyback converters. Table 1. Notes: 1. Typical continuous power in a non-ventilated enclosed adapter measured at 50°C ambient. 2. Maximum practical continuous power in an open frame design at 50°C ambient. 3. 230 VAC or 100/115 VAC with doubler. Typical Circuit AC IN DC OUT Vstr Ipk PWM Vfb Drain Vcc Source Figure 1. Typical Flyback Application Rev.1.0.4 ©2004 Fairchild Semiconductor Corporation FSDL0165RN Internal Block Diagram Vcc 2 + Vstr 5 Drain 6,7,8 Istart Soft start V BURL /V BURH – 8V/12V V BURH Vcc I B_PEAK Vcc I delay Vcc Vcc good Freq. Modulation Vref Internal Bias OSC V FB 3 I FB Normal S Q PWM Burst R Q 2.5R Ipk 4 R Gate driver LEB V SD Vcc S Q 1 GND AOCP Vocp Vovp TSD Vcc […]
DM0265R Datasheet
