Part Number: FS-N10
Function: Digital Fiber Sensor Instruction Manual
Package: Module type
Manufacturer: Keyence
Images:
1 page
Description
FS-N10 is Digital Fiber Sensor.
1. Mounting on a DIN Rail
(1) Align the claw at the bottom of the main body with the DIN rail, as shown in figure1.
While pushing the main body in the direction of the arrow 1, push down in the direction of arrow 2.
(2) To dismount the sensor, raise the main body in the direction of the arrow 3 while pushing the
main body in the direction of arrow 1.
2. Connecting Fiber Unit
(1) Open the dust cover in the direction shown by arrow 1.
(2) Move the fiber lock lever in the direction shown by arrow 2.
(3) Insert a fiber unit into the amplifier as indicated by arrow 3 (approximately 14 mm).
(4) Move the fiber lock lever in the direction shown by arrow 4 to secure the fiber.
3 page
FS-N10 PDF Manual
Posts related to ‘ Sensor ‘
Part number | Description |
AT42QT1040 | Qtouch Sensor IC – QT1040 – ATMEL |
RE200B | Passive Infrared Sensor – Nippon |
IMX238 | IMX238LQJ, CMOS Image Sensor |
LJ12A3-4-Z-BY | Inductive Proximity Sensor |
IMX322 | CMOS Image Sensor – Sony ( PDF ) |
E2SW261M | Proximity Sensor |
AM2320 | Temperature and Humidity Sensor |
MD-PS002 | Air Pressure Sensor – Lemore |
KY-038 | Microphone Sound Sensor Module |
AR0140AT | 1/4-Inch Digital Image Sensor |