Part Number: M5003
Function: EL LAMP DRIVER IC
Manufacturer: MOSDESIGN SEMICONDUCTOR
Images:
1 page
Description
The M5003 is CMOS chip design for Electro-luminescence Lamp (EL) to light has independent circuit to control switching and EL driver frequency circuit, The switching frequency is decided by CKX, If OSC connect a resistor to VDD, or connect a capacitor to VSS the switching frequency can be adjusted. Delay function can be implement if ON connect a capacitor to VSS. The time of delay is decided by the value of capacitor.
MOSDESIGN SEMICONDUCTOR CORP. EL CONTROLE M5003 EL LAMP DRIVER IC
Features
• DC to AC conversion • Built-in RC oscillator • Two trigger inputs TG : active High TGB : active Low • Adjustable EL driver frequency by CKX • Adjustable Switching frequency by CHOPX Applications 产品应用 • EL display BLOCK DIAGRAM 功能方块图 OSC Oscillator CKX Divider Inductor Driver CHOP CHOPX Oscillator ON Oscillator Delay Time Divider EL Driver CK TGB TG S1 S2 Control Logic *All specs and applications shown above subject to change without prior notice. ( 以上电路及规格仅供参考,本公司得径行修正 ) 1/4 2002-06-25 一華半導體股份有限公司 MOSDESIGN SEMICONDUCTOR CORP. EL CONTROLE M5003 EL LAMP DRIVER IC ABSOLUTE MAXIMUM RATING Parameter Supply Voltage Input Voltage Operating Temperature Storage Temperature Rating -0.3 to 5.0 -0.2~VDD +0.2 -20 to 75 -40 to 90 Unit V V ℃ ℃ (TA=25℃) ELECTRICAL CHARACTERISTICS Characteristics Operating Voltage Operating Current Quiescent Current Driving Current CK Frequency CHOP Frequency Oscillator Frequency Sym. VDD IOP ISB IOL IOH FCK FCHOP Fosc Min. 0 Typ. 3 0.1 1 10 100 400 16 25 Max. 3.5 0.5 5 60 Unit V mA μA μA Hz KHz ℃ @VDS=0.5V @VOH=2.5V ±30% TOL. ±30% TOL. External±30% No load Conditions PIN Description Pad Name VDD TG ON OSC CHOPX CKX S2 S1 VSS TGB CK CHOP Description Positive power supply Trigger input active at High Delay option pin, connect cap to VSS Switching freq adjust pin, connect R to VDD Switching freq adjust pin, connect R to VSS EL freq adjust pin, connect cap to VSS EL driving frequency select pin EL driving frequency select pin Negative power supply Trigger input active at Low DC to AC converter output DC to AC converter output 2/4 2002-06-25 一華半導體股份有限公司 MOSDESIGN SEMICONDUCTOR CORP. EL CONTROLE M5003 EL LAMP DRIVER IC PAD ASSIGNMENT & POSITION 7 6 5 4 Y 8 (0,0) X 3 2 1 9 10 11 12 No. 1 2 3 4 5 6 7 8 9 10 11 12 NAME VDD TG ON OSC CKX CHOPX S2 S1 VSS TGB CK CHOP X 429 429 429 429 13 -220 -430 -430 -430 -430 -164 172 UNIT : um Y -488 -263 -30 490 490 490 490 14 -219 -452 -488 -488 – CHIP SIZE ~ 1.3 x 1.5 mm2 – IC substrate should be connected to VDD in PCB(PCB 上 IC 底座必须接 VDD) TIMING WAVEFORM TG TGB CHOP CK EL DRIVER FREQUENCY SELECT S1 X X VSS VSS S2 X VSS X VSS CK ( @3V ) 2K Hz 1K Hz 4K Hz 500 Hz CK ( @1.5V ) 500 Hz 250 Hz 1K Hz 125 Hz 3/4 2002 […]
3 page
Pin
Description
VDD Positive power supply
TG Trigger input active at High
ON Delay option pin, connect cap to VSS
OSC Switching freq adjust pin, connect R to VDD
CHOPX Switching freq adjust pin, connect R to VSS
CKX EL freq adjust pin, connect cap to VSS
S2 EL driving frequency select pin
S1 EL driving frequency select pin
VSS Negative power supply
TGB Trigger input active at Low
CK DC to AC converter output
CHOP DC to AC converter output