EL3B PDF Datasheet – Half Wave Rectifier Tube

Part Number: EL3B

Function: Half Wave Rectifier Tube, Tantalum anode and xenon gas filling

Manufacturer: ELECTRONS

Images:EL3B pdf datasheet

Description

The filament must be lit before drawing d-c. load current. The anode is designed to operate at red heat when under full load. All of the above values are for returns to the filament center tap.

Maximum Rated Anode Current

1. D-c. Meter Value-Continuous : 2.5 amps
2. D-c. Meter Value-Overload less than 10 sec. : 3.7 amps
3. Averaging Time : 7 secs
4. Oscillograph Peak-Continuously recurring : 20 amps
5. Max. Instranenous Short Circuit Current( 0.1 sec.) : 300 amps

[…]

EL3B Datasheet

EL3B pdf

Posts related to ‘ Rectifier ‘

Part number Description
1N5391 1.5A, 50V, Rectifier Diode – Fairchild
BYW85C BYW85C – Silicon Mesa Rectifiers
SB5150 Vrrm=150V, Schottky Rectifier Diode – EIC
SB1060 10A, 60V, Schottky Barrier Rectifier
UF815 8A, 150V, Ultra Fast Recovery Rectifier
SS14 1A, Schottky Barrier Rectifier – Fairchild
SF1603G 150V, 16A, Rectifier, Diode
B20100G Switch-mode Schottky Power Rectifier
ER1002F 10A, 200V, Super Fast Rectifier
R1200 1200V, 500mA, Rectifier, Diode

 

ST9013 PDF Datasheet – 30V, 800mA, NPN Transistor

Part Number: ST9013

Function: 30V, 800mA, NPN Transistor

Package: TO-92 Type

Manufacturer: SEMTECH

Images:ST9013 pdf pinout

Description

The ST9013 is NPN Silicon Epitaxial Planar Transistor. 

Especially suitable for AF-driver stages and low power output stages.
The transistor is subdivided into three groups, G, H and I, according to its DC current gain. As complementary type the PNP transistor ST9012 is recommended.

Characteristics

1. Current Amplification: NPN transistors are designed to amplify electrical current, and can be used in a wide range of electronic applications such as amplifiers, switches, and oscillators.

2. Forward Biased: In order to operate, the base-emitter junction of an NPN transistor must be forward biased, meaning that the base must be connected to a positive voltage relative to the emitter.

3. High Input Impedance: NPN transistors have a high input impedance, which means that they are less likely to draw current from the input source, and are therefore less likely to cause a drop in voltage across the source.

ST9013 datasheet transistor

 

Absolute maximum ratings ( Ta=25°C )

1. Collector to Emitter Voltage: Vceo = 30 V

2. Emitter to Base Voltage: Vebo = 5 V

3. Collector Current: Ic = 800 mA

4. Power Dissipation : Ptot = 625 mW

6. Junction Temperature: Tj = 150°C

7. Storage Temperature: Tsg = -55 ~ +150°C

Applications:

1. Switching and amplifier

ST9013 PDF Datasheet