32LH70YR-TA PDF Datasheet – LCD TV SERVICE MANUAL

This post explains for the LCD TV. TFT LCD (Thin-Film Transistor Liquid Crystal Display) module is a type of flat-panel display that uses thin-film transistor technology to improve the image quality and response time of traditional LCDs. TFT LCD modules consist of a layer of liquid crystal material sandwiched between two sheets of glass or plastic substrates, with each pixel controlled by its own thin-film transistor.

TFT LCD modules are widely used in various electronic devices such as smartphones, tablets, laptops, gaming devices, and automotive displays because they offer high resolution, high contrast, and fast refresh rates.

The Part Number is 32LH70YR-TA.

The function of this manual is 32Inch, LCD TV Manual.

Manufacturer: LG

Preview images :32LH70YR-TA pdf manual

Description

4.1. General Specification

1. Application range
This spec sheet is applied to LCD TV used LP91D chassis.

2. Specification

Each part is tested as below without special appointment.

1) Temperature : 25±5ºC (77±9ºF), CST : 40±5ºC

2) Relative Humidity : 65±10%

3) Power Voltage : Standard input voltage(100~240V@50/60Hz)
* Standard Voltage of each products is marked by models.

4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with BOM.

5) The receiver must be operated for about 5 minutes prior to
the adjustment.

3. Item

1) Screen Size 32” wide Color Display Module Resolution : 1920*1080

2) Aspect Ratio : 16:9

3) LCD Module : 32” TFT WUXGA LCD

32LH70YR-TA datasheet lg

32LH70YR-TA PDF Datasheet

KLMAG2GE4A-A001 PDF – e-MMC,16GB, Memory

Part Number: KLMAG2GE4A-A001

Function: e-MMC,16GB, Memory

Package: 169FBGA Type

Manufacturer: Samsung

Images:

KLMAG2GE4A-A001 pdf datasheet

Description

The SAMSUNG e·MMC is an embedded MMC solution designed in a BGA package form. e·MMC operation is identical to a MMC card and therefore is a simple read and write to memory using MMC protocol v4.41 which is a industry standard.

e·MMC consists of NAND flash and a MMC controller. 3V supply voltage is required for the NAND area (VDDF) whereas 1.8V or 3V dual supply voltage (VDD) is supported for the MMC controller. Maximum MMC interface frequency of 52MHz and maximum bus widths of 8 bit are supported.

There are several advantages of using e·MMC. It is easy to use as the MMC interface allows easy integration with any microprocessor with MMC host. Any revision or amendment of NAND is invisible to the host as the embedded MMC controller insulates NAND technology from the host. This leads to
faster product development as well as faster times to market.

The embedded flash mangement software or FTL(Flash Transition Layer) of e·MMC manages Wear Leveling, Bad Block Management and ECC. The FTL supports all features of the Samsung NAND flash and achieves optimal performance.

Pinouts:

KLMAG2GE4A-A001 pinout memory

Features:

1. MultiMediaCard System Specification Ver. 4.41 compatible. Detail description is referenced by JEDEC Standard

2. SAMSUNG e·MMC supports below special features which are being discussed in JEDEC

– High Priority Interrupt scheme is supported

– Back ground operation is supported.

3. Full backward compatibility with previous MultiMediaCard system ( 1bit data bus, multi-e·MMC systems)

4. Data bus width : 1bit (Default) , 4bit and 8bit

5. MMC I/F Clock Frequency : 0 ~ 52MHz

6. MMC I/F Boot Frequency : 0 ~ 52MHz

KLMAG2GE4A-A001 PDF Datasheet