ATA2069 PDF – Flasher withTrailer Control IC

Part Number: ATA2069

Function: Flasher withTrailer Control IC

Package: SOP 8 Pin Type

Manufacturer: ATMEL Corporation

Images:ATA2069 PDF

Description

A flasher with trailer control, also known as a trailer flasher or trailer light control module, is an electronic device used in automotive applications to control the flashing and lighting functions of a trailer that is being towed by a vehicle.

The bipolar integrated Atmel® circuit ATA2069 is designed for the use in relay-operated automotive flasher modules and makes it possible to detect the outage of flasher bulbs on the vehicle itself and also on a trailer. Vehicles with a trailer hook are equipped with additional pilot lamps in the dashboard. Atmel ATA2069 is off (i.e., the relay is deactivated) as long as the flasher switch (at contact +49a) is open. As soon as this switch is closed, the IC starts reliably with the bright phase. There are two thresholds integrated: one threshold is defined to be 21 + 10W and is designed for the lamp outage detection of 1 of 2 lamps. If the current is below this threshold, the IC switches to frequency doubling, just like the standard flashers (e.g. Atmel U2043B).

The other threshold is defined to be 42 + 10W and is designed for the outage detection of 1 of 3 lamps; if this happens, the additional trailer pilot lamp is switched off, but there is no frequency doubling. 50 ms after the start of the bright phase, the comparator measures the voltage drop at the shunt and latches this value for the rest of the bright phase. The output of this pilot lamp (pin 8) is short-circuit protected against GND. In case of a short circuit the external transistor is switched off after 52ms for the rest of the current flasher cycle, but it is enabled again for the next cycle.

Features:

• Lamp Outage Indication for Car and Trailer

• Temperature and Supply Voltage Compensated Flashing Frequency

• Relay Driver Output with High Current Carrying Capacity and Low Saturation Voltage

• Minimum Lamp Load for Flasher Operation > 10W […]

Block Diagram:

ATA2069 pinout datasheet

ATA2069 PDF Datasheet

TDA9381PS PDF – TV Signal Processor, DIP 64 ( TDA9381 )

Part Number: TDA9381PS, TDA9381

Function: TV signal processor

Package: DIP 64 Pin type

Manufacturer: Philips Semiconductor

Images:

TDA9381PS datasheet

 

Description

TDA9381PS is TV signal processor-Teletext decoder with embedded µ-Controller. A TV signal processor with a Teletext decoder is a component or module within a television that is responsible for processing incoming television signals and extracting Teletext data from those signals. Teletext is a text-based information and graphics service that can be transmitted alongside television broadcasts, providing viewers with additional information, news, weather updates, program listings, and more.

The various versions of the TDA9381PS series combine the functions of a TV signal processor together with a µ-Controller and US Closed Caption decoder. Most versions have a Teletext decoder on board. The Teletext decoder has an internal RAM memory for 1or 10 page text. The ICs are intended to be used in economy television receivers with 90° and 110° picture tubes.

TDA9381PS pdf

Features

1. Multi-standard vision IF circuit with alignment-free PLL demodulator

2. Internal (switchable) time-constant for the IF-AGC circuit

3. A choice can be made between versions with mono intercarrier sound FM demodulator and versions with QSS IF amplifier.

4. The mono intercarrier sound versions have a selective FM-PLL demodulator which can be switched to the different FM sound frequencies (4.5/5.5/6.0/6.5 MHz). The quality of this system is such that the external band-pass filters can be omitted.

5. Source selection between ‘internal’ CVBS and external CVBS or Y/C signals

6. Integrated chrominance trap circuit

7. Integrated luminance delay line with adjustable delay time

 

TDA9381PS PDF Datasheet