Texas Instruments Archives - Page 49 of 128

Description

The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply
TIA/EIA-232-F voltage levels from a single 5-V supply. Each receiver converts TIA/EIA-232-F inputs
to 5-V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5
V, and can accept ±30-V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.

Part Number: LM358

Function: Low Power Dual Operational Amplifier

Package: DIP, SO 8 Pin

Manufacturer: National Semiconductor (Texas Instruments)

Pinouts:

LM358 Pinout

Description

The LM358 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.

Application areas include transducer amplifiers, dc gain blocks and all the conventional op amp circuits which now can be more easily implemented in single power supply systems. For example, the LM158 series can be directly operated off of the standard +5V power supply voltage which is used in digital systems and will easily provide the required interface electronics without requiring the additional ±15V
power supplies. The LM358 and LM2904 are available in a chip sized pack age (8-Bump micro SMD) using National’s micro SMD pack age technology.

Acquired by Texas Instruments on September 23rd, 2011.

LM358 Datasheet

Other data sheets are available within the file: LM158, LM158AH, LM158AH/883, LM158AHLQML, LM158AHLQMLV