78L05 Datasheet PDF – 5V, 100mA, Positive Regulator

This is 78L05 is a voltage regulator integrated circuit (IC) that provides a regulated output voltage of 5 volts. It is commonly used in electronic circuits to provide a stable voltage supply to other components, such as microcontrollers, sensors, and LEDs.

Part Number: 78L05

Function: 5V, 3-Terminal Positive Regulator

Package: TO-92 Type

Manufacturer: National Semiconductor (Texas Instruments)

Image and Pinouts:
78L05 datasheet

Description

The 78L05 series of three terminal positive regulators is available with several fixed output voltages making them useful in a wide range of applications. When used as a zener diode/resistor combination replacement, the LM78LXX usually results in an effective output impedance improvement of two orders of magnitude, and lower quiescent current. These regulators can provide local on card regulation, eliminating the distribution problems associated with single point regulation. The voltages available allow the LM78LXX to be used in logic systems, instrumentation, HiFi, and other solid state electronic equipment.

Features

1. 78L05 in micro SMD package

2. Output voltage tolerances of ±5% over the temperature range

3. Output current of 100mA

4. Internal thermal overload protection

5. Output transistor safe area protection

6. Internal short circuit current limit

7. Easy to use: requires minimal external components for operation

8. Low cost: widely available and affordable

9. Stable and accurate: provides a regulated output voltage with low output ripple and noise

10. Short-circuit and thermal protection: protects the device and other components from damage in case of a fault

11. Limited output current: can only supply up to 100mA, which may not be sufficient for some applications

12. Low efficiency: the device dissipates a significant amount of power as heat, which can be wasteful and requires heat sinking in high-current applications

13. Voltage drop: the device has a voltage drop of typically 2V at 100mA, which can affect the efficiency and performance of some circuits

Acquired by Texas Instruments on September 23rd, 2011.

78L05 Datasheet PDF Download


78L05 pdf

Other data sheets are available within the file: 78L05ACM, 78L05ACMX, 78L09, 78L09ACZ

Related articles across the web

DRV8825 Datasheet PDF – Stepper Motor Controller IC – TI

Part Number: DRV8825, DRV8825PWPR

Function: Stepper Motor Controller IC

Package: HTSSOP 28 Pin Type

Manufacturer: Texas Instruments

Image

drv8825-stepper-motor-controller

Description

The DRV8825 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers and a microstepping indexer, and is intended to drive a bipolar stepper motor. The output driver block consists of N-channel power MOSFET’s configured as full H-bridges to drive the motor windings.

The DRV8825 is capable of driving up to 2.5 A of current from each output (with proper heat sinking, at 24 V and 25°C).

 

Pinout

drv8825-datasheet-pinout

 

Features

1. PWM Microstepping Stepper Motor Driver

(1) Built-In Microstepping Indexer
(2) Up to 1/32 Microstepping

2. Multiple Decay Modes

(1) Mixed Decay
(2) Slow Decay
(3) Fast Decay

3. 8.2-V to 45-V Operating Supply Voltage Range

4. 2.5-A Maximum Drive Current at 24 V and TA = 25°C

5. Simple STEP/DIR Interface

6. Low Current Sleep Mode

Circuit

drv8825-circuit

Applications:

1. Automatic Teller Machines

2. Money Handling Machines

3. Video Security Cameras

4. Office Automation Machines

 

Official Homepage: https://www.ti.com/product/DRV8825

Reference Site:

1. https://www.pololu.com/product/2133

2. https://reprap.org/wiki/DRV8825

3. https://github.com/laurb9/StepperDriver

 

DRV8825 Datasheet PDF


 

 

Related articles across the web