analog

ADS7960SDBT Datasheet PDF – Analog-to-digital converter

Posted on by pinout

Part Number: ADS7960SDBT

Function: 12/10/8-Bit, 1 MSPS, 16/12/8/4-Channel, Single-Ended, MicroPower, Serial Interface ADC

Package: 38 Pin TSSOP Type

Manufacturer: Texas Instruments

Pinouts:

ADS7960SDBT datasheet

 

Description

The ADS79xx is a 12-, 10-, 8-bit pin compatible multichannel analog-to-digital converter family. The
device comparison table shows all twelve devices from this product family.
The devices include a capacitor based SAR A/D converter with inherent sample and hold.

Features

1. 1-MHz Sample Rate Serial Devices
2. Product Family of 12/10/8-Bit Resolution
3. Zero Latency
4. 20-MHz Serial Interface
5. Analog Supply Range: 2.7 to 5.25V
6. I/O Supply Range: 1.7 to 5.25V
7. Two SW Selectable Unipolar, Input Ranges: 0 to 2.5V and 0 to 5V
8. Auto and Manual Modes for Channel Selection
9. 12,8,4-Channel Devices can Share 16 Channel Device Footprint
10. Two Programmable Alarm Levels per Channel
11. Four Individually Configurable GPIOs for TSSOP package devices. One GPIO for QFN devices
12. Typical Power Dissipation: 14.5 mW (+VA = 5V, +VBD = 3V) at 1 MSPS
13. Power-Down Current (1 mA)
14. Input Bandwidth (47 MHz at 3dB)
15. 38-,30-Pin TSSOP and 32-,24-Pin QFN Packages

Applications

1. PLC/IPC
2. Optical Line Card Monitoring
3. Medical Instrumentation
4. Digital Power Supplies
5. Multi-Channel, General-Purpose Signal Monitoring
6. High-Speed Data Acquisition Systems
7. High-Speed Closed-Loop Systems

Official Homepage: https://www.ti.com/product/ADS7960

Other data sheets are available within the file: ADS7960, ADS7950, ADS7950SBDBT,

ADS7950SBDBTG4, ADS7950SBDBTR, ADS7950SBDBTRG4

ADS7960SDBT Datasheet PDF Download


ADS7960SDBT pdf

 

TDA8714 Datasheet PDF – 8-bit Analog-to-Digital Converter

Posted on by pinout

Part Number: TDA8714

Function: 8-bit high-speed Analog-to-digital Converter

Package: SO, SSOP 24 Pin Type

Manufacturer: Philips Electronics ( https://www.nxp.com/ )

Pinouts:

TDA8714 datasheet

 

Description

The TDA8714 is an 8-bit high-speed Analog-to-Digital Converter (ADC) for professional video and other applications. It converts the analog input signal into 8-bit binary-coded digital words at a maximum sampling rate of 80 MHz. All digital inputs and outputs are TTL compatible, although a low-level sine wave clock input signal is allowed.

Features

1. 8-bit resolution
2. Sampling rate up to 80 MHz
3. No missing codes guaranteed
4. High signal-to-noise ratio over a large analog input frequency range
5. Overflow/underflow 3-state TTL output
6. TTL compatible digital inputs
7. Low-level AC clock input signal allowed
8. External reference voltage regulator
9. Power dissipation only 340 mW (typical)
10. Low analog input capacitance, no buffer amplifier required
11. No sample-and-hold circuit required.

Applications

1. Video data digitizing
2. Radar pulse analysis
3. Transient signal analysis
4. High energy physics research

Other data sheets are available within the file: TDA8714/4/C1, TDA8714/4/C1/R1, TDA8714M/4, TDA8714M/6

 

TDA8714 Datasheet PDF Download


TDA8714 pdf