ICR18650-22 Datasheet – Lithium-ion Rechargeable Cell

Part Number: ICR18650-22

Function: Lithium-ion Rechargeable Cell Battery

Dimension : Height: 65mm max, Diameter: 18.25mm max

Manufacturer: Samsung

Image :

ICR18650-22 image

 

Description

A ICR18650-22 is Lithium-ion Rechargeable Cell. The battery is a specific type of rechargeable lithium-ion battery cell. It has a cylindrical shape, with a diameter of 18 millimeters and a height of 65 millimeters, hence the name 18650. The “ICR” in the name stands for “Lithium Cobalt Oxide” which is the type of cathode material used in this battery.

The ICR18650-22 cell has a nominal voltage of 3.7 volts and a typical capacity of 2200 milliampere-hours (mAh), although the actual capacity may vary depending on the specific manufacturer and other factors. It is commonly used in a wide range of portable electronic devices, such as laptops, power tools, electric bicycles, and flashlights, as well as in larger battery packs for electric vehicles.

ICR18650-22 datasheet

Temperature Dependence of Discharge Capacity

Capacity comparison at each temperature, measured with discharge constant current 440mA and 2.75V cut-off after the standard charge is as follows.

Charging

2.1 Charging current
Charging current should be less than maximum charge current specified in
the product specification.

2.2 Charging voltage
Charging should be done by voltage less than that specified in
the product specification.

2.3 Charging time
Continuous charging under appropriate voltage does not cause any loss of
characteristics. However, the charge timer is recommended to be installed
from a safety consideration, which shuts off further charging at time specified
in the product specification.

ICR18650-22 Datasheet PDF Download

ICR18650-22 pdf

Other data sheets are available within the file: ICR18650-22


 

MAX6440UTCJVD3 Datasheet PDF – Volt Supervisor Monitor

Part Number: MAX6440UTCJVD3

Function: Low-Power, Battery Monitors with Hysteresis and Integrated µP Reset

Package: SOT23-6 Type

Manufacturer: Maxim Integrated

Pinouts:

MAX6440UTCJVD3 datasheet

 

Description

The MAX6440UTCJVD3, MAX6439 thru MAX6442 are a family of ultra-low-power battery monitors with integrated microprocessor (µP) supervisors. The battery monitors are offered with single or dual low-battery output options that can be used to signal when the battery is OK (enabling full system operation), when the battery is low (for low-power system operation), and when the battery is dead (to disable system operation).

These devices also have an independent µP supervisor that monitors VCCand provides an active-low reset output. A manual reset function is available to reset the µP with a push-button. No external components are required.

Features

1. Immune to Short Battery Voltage Transients

2. Low Current (2.5μA typ at 3.6V)

3. Single and Dual Low-Battery Output Options

4. 150ms Minimum LBO Timeout Period

5. Independent μP Reset with Manual Reset

 

MAX6440UTCJVD3 Datasheet PDF Download


MAX6440UTCJVD3 pdf

Other data sheets are available within the file: MAX6440, ABMN, ABMO, ABMP, ABMQ, ABMR,

MAX6439, MAX6441, MAX6442