Controller

TMS320F241 Datasheet PDF – DSP Controller

Posted on by pinout

Part Number: TMS320F241

Function: DSP CONTROLLER

Package: PLCC 68 Pin, QFP 64 Pin Type

Manufacturer: Texas Instruments

Pinouts:

TMS320F241 datasheet

 

Description

The TMS320F243 and TMS320F241 devices are members of the 24x generation of digital signal processor(DSP) controllers based on the TMS320C2000platform of 16-bit fixed-point DSPs. The F243 is a superset of the F241. These two devices share similar core and peripherals with some exceptions. For example, the F241 does not have an external memory interface. This new family is optimized for digital motor /motion control applications. The DSP controllers combine the enhanced TMS320DSP family architectural design of the C2xx core CPU for low-cost, high-performance processing capabilities and several advanced peripherals optimized for motor /motion control applications. These peripherals include the event manager module, which provides general-purpose timers and PWM registers to generate PWM outputs, and a single,10-bit analog-to-digital converter (ADC), which can perform conversion within 1 µs.

Features

1. High-Performance Static CMOS Technology

2. Includes the TMS320C2xx Core CPU
(1) Object-Compatible With the TMS320C2xx
(2) Source-Code-Compatible With TMS320C25
(3) Upwardly Compatible With TMS320C5x
(4) 50-ns Instruction Cycle Time

3. Commercial and Industrial Temperature Available

4. Memory
(1) 544 Words x 16 Bits of On-Chip Data/Program Dual-Access RAM(DARAM)
(2) 8K Words x 16 Bits of Flash EEPROM
(3) 224K Words x 16 Bits of Total Memory Address Reach (F243 only)

5. External Memory Interface (F243 only)

6. Event-Manager Module
(1) Eight Compare/Pulse-Width Modulation (PWM) Channels
(2) Two 16-Bit General-Purpose Timers With Four Modes, Including Continuous
Upand Up/Down Counting
(3) Three 16-Bit Full Compare Units With Deadband
(4) Three Capture Units (Two WithQuadrature Encoder-Pulse Interface Capability)

7. Controller Area Network (CAN) Module

8. 26 Individually Programmable, Multiplexed General-Purpose I/O (GPIO) Pins

9. Six Dedicated GPIO Pins (F243 only)

10. Phase-Locked-Loop (PLL)-Based Clock Module

11. Watchdog (WD) Timer Module

12. Serial Communications Interface (SCI) Module

13. 16-Bit Serial Peripheral Interface (SPI) Module

 

TMS320F241 Datasheet PDF Download


TMS320F241 pdf

Other data sheets are available within the file:

TMS320F241FN, TMS320F241FNA, TMS320F241FNS ,TMS320F241PG

ICE3B0565 Datasheet – SMPS Current Mode Controller – Infineon

Posted on by pinout

Part Number: ICE3B0565 ( CE380565,  ICE3BO565 )

Function: 650V, Off-Line SMPS Current Mode Controller

Package: DIP 8 Pin

Manufacturer: Infineon Technologies

Image :

ICE3B0565 Image

 

Description

The new generation CoolSET-F3 provides Active Burst Mode to reach the lowest Standby Power Requirements <100mW at no load. As the controller is always active during Active Burst Mode, there is an immediate response on load jumps without any black out in the SMPS. In Active Burst Mode the ripple of the output voltage can be reduced <1%.

Features

1. 650V avalanche rugged CoolMOS with built in switchable Startup Cell

2. Active Burst Mode for lowest Standby Power @ light load controlled by Feedback signal

3. Fast load jump response in Active Burst Mode

4. 67/100 kHz fixed switching frequency

Pinouts:

ICE3B0565 Datasheet

 

 

ICE3A0365
ICE3A0565
ICE3A1065
ICE3A1565
ICE3A2065
ICE3A2565
ICE3B0365
ICE3B0565
ICE3B1065
ICE3B1565
ICE3B2065
ICE3B2565

 

ICE3B0565 Datasheet PDF Download

ICE3B0565 pdf

Other data sheets are available within the file: CE380565, ICE3A0365, ICE3A0565, ICE3A0565Z, ICE3A1065