converter

TLV62080 Datasheet PDF – 1.2A, Step Down Converter

Posted on by pinout

Part Number: TLV62080

Package: WSON 8 Type

Function: 1.2A, High Efficient Step Down Converter

Power Management > DC/DC Switching Regulator > Converter (Integrated Switch) > Step-Down (Buck) Converter > TI TLV62080

The TLV62080 and TLV62084 devices are low cost buck converters in small size with less external components. They are synchronous step-down converters with an input voltage range of 2.5 and 2.7 (2.5 V for TLV62080, 2.7 V for TLV62084) to 5.5 V. The TLV6208x device focuses on high-efficiency step-down conversion over a wide output current range. At medium to heavy loads, the TLV6208x converter operates in PWM mode and automatically enters power save mode operation at light-load currents to maintain high efficiency over the entire load current range.

tlv62084tlv62084-pinout

To address the requirements of system power rails, the internal compensation circuit allows a large selection of external output capacitor values ranging from 10-µF up to 100-uF effective capacitance. With the DCS-Control™ (Direct Control with Seamless transition into power save mode) architecture excellent load transient performance and output voltage regulation accuracy are achieved. The device is available in 2-mm × 2-mm WSON package with Thermal Pad.

2A High Efficient Step Down Converter

  • DCS-Control Architecture for Fast Transient Regulation
  • 2.5 to 5.5-V Input Voltage Range (TLV62080)
  • 2.7 to 5.5-V Input Voltage Range (TLV62084)
  • 100% Duty Cycle for Lowest Dropout
  • Power Save Mode for Light Load Efficiency
  • Output Discharge Function
  • Power Good Output
  • Thermal Shutdown
  • Available in 2 mm × 2 mm 8-Terminal WSON Package
  • For Improved Features Set, See the TPS62080 datasheet (SLVSAE8)

tlv62084-application

Official Site : https://www.ti.com/product/tlv62080

Other data sheets are available within the file:

TLV62080DSGR, TLV62080DSGT, TLV62084, TLV62084DSGR, TLV62084DSGT


 

DAC101S101 Datasheet PDF – Digital-to-Analog Converter

Posted on by pinout

Part Number: DAC101S101

Function: 10-Bit Micro Power, RRO Digital-to-Analog Converter

Package: VSSOP 8 Pin, SOT-23 Type

Manufacturer: Texas Instruments

Pinouts:

DAC101S101 datasheet

Description

The DAC101S101 is a full-featured, general purpose 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V
supply and consumes just 175 µA of current at 3.6 Volts. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range and is compatible with
standard SPI, QSPI, MICROWIRE and DSP interfaces. Competitive devices are limited to 20 MHz clock rates at supply voltages in the 2.7V to 3.6V range.

Features

1. DAC101S101Q is AEC-Q100 Grade 1 Qualified and is Manufactured on an Automotive Grade Flow.
2. Ensured Monotonicity
3. Low Power Operation
4. Rail-to-Rail Voltage Output
5. Power-on Reset to Zero Volts Output
6. Wide Temperature Range of −40°C to +125°C
7. Wide Power Supply Range of +2.7V to +5.5V
8. Small Packages
9. Power Down Feature

Applications

1. Battery-Powered Instruments
2. Digital Gain and Offset Adjustment
3. Programmable Voltage & Current Sources
4. Programmable Attenuators
5. Automotive

Other data sheets are available within the file:

DAC101S101CIMK/NOPB, DAC101S101CIMKX/NOPB, DAC101S101CIMM,

DAC101S101CIMM/NOPB

DAC101S101 Datasheet PDF Download


DAC101S101 pdf