Part Number: AD9773

Function: 0.3-25V; 12-bit, 160MSPS 2x/4x/8x interpolating dual TxDAC+ D/A converter

Package: 80-Lead Thin Quad Flat Package, Exposed Pad Type

Manufacturer: Analog Devices

Pinouts:

 

Description

The AD9773 is the 12-bit member of the AD977x pin compatible, high performance, programmable 2×/4×/8× interpolating TxDAC+® family. The AD977x family features a serial port interface (SPI) that provides a high level of programmability, thus allowing for enhanced system-level options. These options include selectable 2×/4×/8× interpolation filters; fS/2, fS/4, or fS/8 digital quadrature modulation with image rejection; a direct IF mode; programmable channel gain and offset control; programmable internal clock divider; straight binary or twos complement data interface; and a single port or dual-port data interface.

The selectable 2×/4×/8× interpolation filters simplify the requirements of the reconstruction filters while simultaneously enhancing the TxDAC+ family’s pass-band noise/distortion performance. The independent channel gain and offset adjust registers allow the user to calibrate LO feedthrough and side band suppression errors associated with analog quadrature modulators. The 6 dB of gain adjustment range can also be used to control the output power level of each DAC.

Features

1. 12-bit resolution, 160 MSPS/400 MSPS input/output data rate
2. Selectable 2×/4×/8× interpolating filter
3. Programmable channel gain and offset adjustment
4. fS/2, fS/4, fS/8 digital quadrature modulation capabilit
5. Direct IF transmission mode for 70 MHz + IFs
6. Enables image rejection architecture
7. Fully compatible SPI port
8. Excellent ac performance
(1) SFDR −69 dBc @ 2 MHz to 35 MHz
(2) WCDMA ACPR −69 dB @ IF = 19.2 MHz
9. Internal PLL clock multiplier
10. Selectable internal clock divider
11. Versatile clock input
12. Differential/single-ended sine wave or
13. TTL/CMOS/LVPECL compatible
14. Versatile input data interface
15. Twos complement/straight binary data coding
16 .Dual-port or single-port interleaved input data

Applications

1. Communications
2. Analog quadrature modulation architecture
3. 3G, multicarrier GSM, TDMA, CDMA systems
4. Broadband wireless, point-to-point microwave radios
5. Instrumentation/ATE

Other data sheets are available within the file:

AD9773EB, AD9773AST, AD9773BSV, AD9773BSVRL

AD9773 Datasheet PDF Download

Part Number: AD9144

Function: Quad, 16-Bit, 2.8 GSPS, TxDAC+, Digital-to-Analog Converter

Package: 88-lead LFCSP with exposed pad Type

Manufacturer: Analog Devices

Pinouts:

 

Description

The AD9144 is a quad, 16-bit, high dynamic range digital-to analog converter (DAC) that provides a maximum sample rate of 2.8 GSPS, permitting a multicarrier generation up to the Nyquist frequency.

The DAC outputs are optimized to interface seamlessly with the ADRF672x analog quadrature modulators (AQMs) from Analog Devices, Inc. An optional 3-wire or 4-wire serial port interface (SPI) provides for programming/readback of many internal parameters. Full-scale output current can be programmed over a typical range of 13.9 mA to 27.0 mA.

Block Diagram :

Features

1. Supports input data rate >1 GSPS

2. Proprietary low spurious and distortion design

3. Multiple chip synchronization

4. Transmit enable function allows extra power saving

 

 

Other data sheets are available within the file:

AD9144EBZ, AD9144FMC-EBZ, AD9144M6720-EBZ, AD9144BCPZ

 

AD9144 Datasheet PDF Download