DAC5662-EP Datasheet – 12-bit, D/A Converter ( PDF )

Part Number: DAC5662-EP

Function: DUAL 12-BIT 200-MSPS DIGITAL-TO-ANALOG CONVERTER

Package: 48-Pin Thin Quad Flat Pack (TQFP) type

Manufacturer: Texas Instruments

Pinouts:

DAC5662-EP datasheet

 

Description

The DAC5662, DAC5662-EP is a monolithic, dual-channel 12-bit, high-speed digital-to-analog converter (DAC) with on-chipvoltage reference.
Operating with update rates of up to 200 MSPS, the DAC5662 offers exceptional dynamic performance, tight gain, and offset matching characteristics that make it suitable in either I/Q baseband or direct IF communication applications.
Each DAC has a high-impedance differential-current output, suitable for single-ended or differential analog-output configurations. External resistors allow scaling the full-scale output current for each DAC separately or together, typically between 2 mA and 20 mA. An accurate on-chip voltage reference is temperature compensated and delivers a stable 1.2-V reference voltage. Optionally, an external reference may be used.

The DAC5662 has two 12-bit parallel input ports with separate clocks and data latches. For flexibility, the DAC5662 also supports multiplexed data for each DAC on one port when operating in the interleaved mode. The DAC5662 has been specifically designed for a differential transformer coupled output with a 50-Ω doubly terminated load. For a 20-mA full-scale output current a 4:1 impedance ratio (resulting in an output power of
4 dBm) and 1:1 impedance ratio transformer (–2-dBm output power) are supported.

Features

• Controlled Baseline
– One Assembly
– One Test Site
– One Fabrication Site
• Extended Temperature Performance –55°C to 125°C
• Enhanced Diminishing Manufacturin Sources (DMS) Support
• Enhanced Product-Change Notificat
• Qualification Pedigree
• 12-Bit Dual Transmit Digital-to-Anal Converter (DAC)
• 200-MSPS Update Rate
• Single Supply : 3 V to 3.6 V
• High Spurious-Free Dynamic Range (SFDR) : 85 dBc at 5 MHz
• High Third-Order Two-Tone Intermodulation (IMD3) : 78 dBc at 15.1 and 16.1 MHz
• WCDMA Adjacent Channel Leakage Ratio(ACLR): 70 dB at 30.72 MHz
• Independent or Single Resistor Gain Control
• Dual or Interleaved Data
• On-Chip 1.2-V Reference
• Low Power: 330 mW
• Power-Down Mode: 15 mW

Other data sheets are available within the file:

DAC5662MPFBEP, DAC5662MPFBREP, V62/06651-01XE, V62/06651-02XE

 

DAC5662-EP Datasheet PDF Download


DAC5662-EP pdf

XL1410 Datasheet PDF – 18V, Buck DC to DC Converter

Part Number: XL1410

Function: 2A,, 380KHz, 18V, Buck DC to DC Converter

Package: SOIC-8 Pin Type

Manufacturer: XLSEMI

Image and Pinouts:

XL1410 datasheet

 

Description

The XL1410 is a 380KHz fixed frequency PWM buck (step-down) DC/DC converter, capable of  driving a 2A load with high efficiency, low ri pple and excellent line and load regulation.

Requiring a minimum number of  external  components, the regulator is simple to use and include internal frequency compensation and a fixed-f requency oscillator.

Function Block :

components

Features

1. Wide 3.6V to 18V Input Voltage Range

2. Output Adjustable from 1.222V to 16V

3. Maximum Duty Cycle 100%

4. Minimum Drop Out 0.6V

5. Fixed 380KHz Switching Frequency

6. 2A Constant Output Current Capability

7. Internal Optimize Power MOSFET

8. High efficiency

9. Excellent line and load regulation

 

Typical Applications:

components

Applications:

1. LCD Monitor and LCD TV

2. Digital Photo Frame

3. Set-up Box

4. ADSL Modem

5. Telecom / Networking Equipment

Other data sheets are available within the file: XL-1410, XL1410E1

 

XL1410 Datasheet PDF Download


XL1410 pdf