Driver

TPL7407L Datasheet PDF – 40V, 7-Channel Low Side Driver

Posted on by pinout

Part Number: TPL7407L

Function: 40V, 7-Channel Low Side Driver / High-Voltage Outputs 40V

Package: Available in 16-pin SOIC and TSSOP Type

Manufacturer: Texas Instruments

Pinouts:

TPL7407L datasheet

 

Description

The TPL7407L is a high-voltage, high-current NMOS transistor array. This device consists of seven NMOS transistors that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads. The maximum drain-current rating of a single NMOS channel is 600 mA. New regulation and drive circuitry added to give maximum drive
strength across all GPIO ranges (1.8V-5.0V).

The transistors can be paralleled for higher current capability. The TPL7407L’s key benefit is its improved power efficiency and lower leakage than a Bipolar Darlington Implementation. With the lower Vol the user is dissipating less than half the power than traditional relay drivers with currents less than 250mA per channel.

Features

1. 600-mA Rated Drain Current (Per Channel)

2. CMOS Pin-to-Pin Improvement of 7-channel Darlington Array (e.g. ULN2003A)

3. Internal Free-wheeling Diodes for Inductive Kick-back Protection

4. Input Pull-down Resistors Allows Tri-stating the Input Driver

5. Input RC-Snubber to Eliminate Spurious Operation in Noisy Environment

 

TPL7407L Datasheet PDF Download


TPL7407L pdf

Other data sheets are available within the file:

TPL7407, TPL7407LD, TPL7407LDR, TPL7407LPW, TPL7407LPWR

L6201PS Datasheet PDF – DMOS FULL BRIDGE DRIVER

Posted on by pinout

Part Number: L6201PS

Function: DMOS FULL BRIDGE DRIVER

Package: DIP 18 Pin, SO 20 Pin, Multiwatt11 Type

Manufacturer: STMicroelectronics

Image and Pinouts:

L6201PS datasheet

 

Description

The I.C. is a full bridge driver for motor control applications realized in Multipower-BCD technology which combines isolated DMOS power transistors with CMOS and Bipolar circuits on the same chip. By using mixed technology it has been possible to optimize the logic circuitry and the power stage to achieve the best possible performance. The DMOS output transistors can operate at supply voltages up to 42V and efficiently at high switching
speeds. All the logic inputs are TTL, CMOS and mC compatible. Each channel (half-bridge) of
the device is controlled by a separate logic input, while a common enable controls both channels. The I.C. is mounted in three different packages.

Features

1. SUPPLY VOLTAGE UP TO 48V

2. 5A MAX PEAK CURRENT (2A max. for L6201)

3. TOTAL RMS CURRENT UP TO

4. L6201: 1A; L6202: 1.5A; L6203/L6201PS: 4A

5. RDS (ON) 0.3 W (typical value at 25 °C)

6. CROSS CONDUCTION PROTECTION

7. TTL COMPATIBLE DRIVE

8. OPERATING FREQUENCY UP TO 100 KHz

9. THERMAL SHUTDOWN

 

 

L6201PS Datasheet PDF Download


L6201PS pdf

Other data sheets are available within the file: L6201, L6202, L6203