Winbond 25Q32FVSIG Datasheet – 32M-bit Serial Flash Memory

Part Number: W25Q32FVSSIG, Marking : 25Q32FVSIG

Function: 32M-bit Serial Flash Memory

Package: SOIC-8 208-mil Type

Manufacturer: Winbond Electronics Corporation

Image

Winbond 25Q32FVSIG Datasheet

Description

The Winbond 25Q32FVSIG (32M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 4mA active and 1μA for power-down. All devices are offered in space-saving packages.

Pinout
25Q32FVSIG Pinout

Features

Highest Performance Serial Flash

1. 104MHz Single, Dual/Quad SPI clocks
2. 208/416MHz equivalent Dual/Quad SPI
3. 50MB/S continuous data transfer rate
4. More than 100,000 erase/program

Advanced Security Features

1. Software and Hardware Write-Protect
2. Power Supply Lock-Down and OTP protection
3. Top/Bottom, Complement array protection
4. Individual Block/Sector array protection
5. 64-Bit Unique ID for each device
6. Discoverable Parameters (SFDP) Register
7. 3X256-Bytes Security Registers with OTP locks
8. Volatile & Non-volatile Status Register Bits

 

Winbond 25Q32FVSIG Datasheet


Other data sheets are available within the file: W25Q32FVSSIP, 25Q32FVSIP

Related articles across the web

KLMAG2GE4A-A001 Datasheet – 64Gb MLC x 2, eMMC – Samsung

Part Number: KLMAG2GE4A-A001, KLMBG4GE4A-A001, KLMCG8GE4A-A001

Function: 16GB, 64Gb MLC x 2, eMMC

Package: 169FBGA Type ( 12mm x 16mm x 1.0mm )

Manufacturer: Samsung

Image
KLMAG2GE4A-A001 emmc

Description

The SAMSUNG e·MMC is an embedded MMC solution designed in a BGA package form. e·MMC operation is identical to a MMC card and therefore is a simple read and write to memory using MMC protocol v4.41 which is a industry standard. e·MMC consists of NAND flash and a MMC controller. 3V supply voltage is required for the NAND area (VDDF) whereas 1.8V or 3V dual supply voltage (VDD) is supported for the MMC controller. Maximum MMC interface frequency of 52MHz and maximum bus widths of 8 bit are supported.


Pinout

KLMAG2GE4A-A001 datasheet pinout
Features

1. MultiMediaCard System Specification Ver. 4.41 compatible. Detail description is referenced by JEDEC Standard

2. SAMSUNG e·MMC supports below special features which are being discussed in JEDEC
– High Priority Interrupt scheme is supported
– Back ground operation is supported.

3. Full backward compatibility with previous MultiMediaCard system ( 1bit data bus, multi-e·MMC systems)
4. Data bus width : 1bit (Default) , 4bit and 8bit

 

KLMAG2GE4A-A001 Datasheet


 

Related articles across the web