ESP8266 Datasheet – ESP8266EX WiFi Module – Espressif

Part Number: ESP8266, ESP8266EX

Package : QFN32 Type

Manufacturer: Espressif Systems IOT Team

Introduction

Espressif Systems’ Smart Connectivity Platform (ESCP) is a set of high performance, high integration
wireless SOCs, designed for space and power constrained mobile platform designers. It provides
unsurpassed ability to embed WiFi capabilities within other systems, or to function as a standalone
application, with the lowest cost, and minimal space requirement.

Image ESP8266EX

Pinout
ESP8266EX Pinout

Description

The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost effective board with a huge, and ever growing, community.

This module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existance interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF parts.

ESP8266EX datasheet


Reference Site

1. https://en.wikipedia.org/wiki/ESP8266

2. http://www.esp8266.com/ ( Everything ESP8266 )

3. https://www.sparkfun.com/products/13678

 

Related articles across the web

V290BJ1-LE1 Datasheet – 29 inch TFT LCD Module – CHIMEI

Part Number: V290BJ1-LE1

Function : 29 inch TFT Liquid Crystal Display module

Manufacturer: ChiMei Innolux

Image

v290bj1-le1-tft-lcd
Description

V290BJ1-LE1 is a 29” TFT Liquid Crystal Display module with LED Backlight unit and 1ch-LVDS interface. This module supports 1366 x 768 HDTV format and can display 16.7M colors (8-bit).

APPLICATION
1. Standard Living Room TVs.
2. Public Display Application.
3. Home Theater Application.
4. MFM Application

 

Pinout

v290bj1-le1-datasheet-pinout

Features

1. High brightness (300 nits)
2. High contrast ratio (3000:1)
3. Fast response time (Gray to gray average 9.5 ms)
4. High color saturation (NTSC 72%)
5. HDTV (1366 x 768 pixels) resolution
6. DE (Data Enable) only mode
7. LVDS (Low Voltage Differential Signaling) interface
8. Optimized response time for 50/60 Hz frame rate
9. Ultra wide viewing angle : Super MVA technology
10. RoHS compliance

General Specifications

1. Active Area : 631.092 (H) x 354.816 (V) (29” diagonal) mm
2. Bezel Opening Area : 635 (H) x 358.8 (V) mm
3. Driver Element : a-si TFT active matrix
4. Pixel Number : 1366 x R.G.B. x 768 pixel
5. Pixel Pitch(Sub Pixel) : 0.154 (H) x 0.462 (V) mm
6. Pixel Arrangement : RGB Vertical Stripe
7. Display Colors : 16.7M color
8. Display Operation Mode : Transmissive mode / Normally black
9. Surface Treatment : Anti-Glare coating (Haze 3.5%)
10. Rotation Function: Unachievable
11. Display Orientation : Signal input with “CMI”

 

V290BJ1-LE1 Datasheet


 

Related articles across the web