Part Number: LM5009

Function: 150mA, 100V, Switching Regulator

Package: 8-Pin VSSOP, 8-Pin WSON Type

Manufacturer: Texas Instruments

Pinouts:

 

Description

The LM5009 Step Down Switching Regulator features all of the functions needed to implement a low cost, efficient, Buck bias regulator. This device is capable of driving a 150 mA load current from a 9.5V to 95V input source. The switching frequency can exceed 600 kHz, depending on the input and output voltages. The output voltage may be set from 2.5V to 85V. This high voltage regulator contains an N-Channel buck switch and internal startup regulator. The device is easy to implement and is provided in the 8-pin VSSOP and the thermally enhanced 8-pin WSON packages.

The LM5009 is a well suited alternative to a high voltage monolithic or discrete linear solution where the power loss becomes unacceptable. The regulator’s operation is based on a control scheme using an ON time inversely proportional to VIN. This feature allows the operating frequency to remain relatively constant over load and input voltage variations. The control scheme requires no loop compensation, resulting in an ultra-fast transient response. An intelligent current limit is implemented with forced OFF time, which is inversely proportional to Vout. This scheme ensures short circuit protection while providing minimum foldback. Other features include: Thermal Shutdown, Vcc under-voltage lockout, Gate drive under-voltage lockout, and Maximum Duty Cycle limiter.

 

Features

• Integrated N-Channel MOSFET

• 150-mA output current capability

• Ultra-Fast Transient Response

• No loop compensation required

• Vin feed forward provides constant operating frequency

• Switching frequency can exceed 600 kHz

• Highly efficient operation

• 2% accurate 2.5V feedback from -40°C to 125°C

• Internal startup regulator

• Intelligent current limit protection

• External shutdown control

• Thermal shutdown

Other data sheets are available within the file:

LM5009MM, LM5009MM/NOPB, LM5009MMX, LM5009MMX/NOPB

LM5009 Datasheet PDF Download

Part Number: APL5537

Function: Dual Channel 300mA Low Dropout Linear Regulator

Package: TSOT-23-6A, TDFN 1.6×1.6

Manufacturer: Anpec Electronics

Image and Pinouts:

 

General 

Description

The APL5537 is a dual channel low dropout linear regulator, which operates from 2.5V to 5.5V input  voltage and delivers up to 300mA output current at each channel. Typical dropout voltage is only 240mV at 300mA. The APL5537 with low quiescent current, high PSRR, and low noise is ideal for battery powered system appliances. Other features include logic-controlled  shutdown mode, over-temperature  protection, short-circuit current-limit, and current-limit protection to ensure specified output current. The APL5537 is available in the TSOT-23-6A and TDFN1.6×1.6-6 packages.

Features

1. Dual Regulator Outputs
2. Low Dropout Voltage: Typical 240mV at 300m
3. Wide Input Voltage Range: 2.5V to 5.5V
4. Low Quiescent Current: Typical 58mA
5. High PSRR: 70dB at 1kHz
6. Low Shutdown Current: <1mA
7. Shutdown Function
8. Output Current-Limit Protection
9. Short-Circuit Current-Limit Protection
10. Over-Temperature Protection
11. Lead Free and Green Devices Available(RoHS Compliant)

Applications

1. Mobile Phone
2. GPS Navigation
3. Blue Tooth Headset

Other data sheets are available within the file: APL5537-7MCTI-TRG

APL5537 Datasheet PDF Download