75A176 Datasheet PDF – Differential Bus Transceiver

Part Number: SN75ALS176D, SN75ALS176DR

Marking : 75A176

Function: Differential Bus Transceiver

Package: SO 8 Pin Type

Manufacturer: Texas Instruments

Image:

75A176

Description

The 75A176 is differential bus transceiver.

The SN65ALS176 and SN75ALS176 series differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet TIA/EIA-422-B, TIA/EIA-485-A, and ITU Recommendations V.11 and X.27.

The SN65ALS176 and SN75ALS176 series combine a 3-state, differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control.

The driver differential outputs and the receiver differential inputs are connected internally to form a differential input/output (I/O) bus port that is designed to offer minimum loading to the bus when the driver is disabled or VCC = 0. This port features wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications.

Pinouts
SN75ALS176 datasheet

 

Features

1. Wide Positive and Negative Input/Output Bus-Voltage Ranges

2. Thermal Shutdown Protection

3. Driver Positive and Negative Current Limiting

4. Receiver Input Hysteresis

5. Glitch-Free Power-Up and Power-Down Protection

6. Receiver Open-Circuit Fail-Safe Design

75A176 Datasheet PDF Download


SN75ALS176 pdf

Other data sheets are available within the file: SN65ALS176DR, SN65ALS176P, SN65LBC176D, SN65LBC176DR

7LB184 Datasheet PDF – Differential Transceiver – TI

Part Number: SN75LBC184, SN75LBC184D, SN75LBC184DG4, SN75LBC184DR

Marking : 7LB184

Function: Differential Transceiver With Transient Voltage Suppression

Manufacturer: Texas Instruments

Image and Pinouts:
7LB184 datasheet

Description

The SN75LBC184 and SN65LBC184, 7LB184 are differential data line transceivers in the trade-standard footprint of the SN75176 with built-in protection against high-energy noise transients. This feature provides a substantial increase in reliability for better immunity to noise transients coupled to the data cable over most existing devices. Use of these circuits provides a reliable low-cost direct-coupled (with no isolation transformer) data line interface without requiring any external components.

The SN75LBC184 and SN65LBC184 can with stand overvoltage transients of 400-W peak
(typical). The conventional combination wave called out in IEC 61000-4-5 simulates the
overvoltage transient and models a unidirectional surge caused by overvoltages from switching and secondary lightning transients.

Features

1. Integrated Transient Voltage Suppression

2. Controlled Driver Output-Voltage Slew Rates Allow Longer Cable Stub Lengths

3. 250-kbps in Electrically Noisy Environments

4. Open-Circuit Fail-Safe Receiver Design

5. Power-Up and Power-Down Glitch Protection

Applications:

1. Industrial Networks

2. Utility Meters

3. Motor Control

 

7LB184 Datasheet PDF Download

7LB184 pdf


Other data sheets are available within the file: 75LBC184, SN75LBC184D

Related articles across the web