NX1117CADJZ Datasheet PDF – LDO Voltage Regulator

Part Number: NX1117CADJZ

Marking Code : NCADJZ

Function: LDO Voltage Regulator,  20VIN ADJ 1A ( Output = 1.25 adjustable )

Package: SOT-223 Type

Manufacturer: NXP Semiconductors.

Image and Pinouts:

NX1117CADJZ datasheet

Description

The NX1117CADJZ, NX1117C / NX1117CE are two series of low-dropout positive voltage regulators with an output current capability of 1 A. The two series consist of 18 fixed output voltage versions and two adjustable output voltage versions. The regulators feature output current limiting, Safe Operating Area (SOA) control, and thermal shutdown.

Features

  • Output current up to 1A
  • Adjustable output voltage via external resistor divider
  • Wide input voltage range: up to 20V
  • Low dropout voltage (typically ~1.1V at 1A)
  • High output voltage accuracy: ±1% / ±1.25%
  • No minimum load requirement (fixed versions)
  • Built-in thermal shutdown protection
  • Output current limiting
  • Safe Operating Area (SOA) protection
  • Wide operating temperature range

Design Notes

  • Ensure input voltage exceeds output voltage by at least the dropout voltage (~1.1V)
  • Output capacitor ESR is important for stability—follow datasheet recommendations
  • Thermal dissipation can be significant: P = (VIN − VOUT) × IOUT
  • Use adequate copper area or heatsink for high current applications
  • Suitable as a post-regulator after switching converters to reduce ripple/noise
  • Avoid excessive input voltage to minimize power loss

Advantages

  • Simple design with minimal external components
  • Stable and low-noise output
  • Flexible adjustable output
  • Integrated protection features improve reliability

Typical Applications

  • Post-regulation for DC-DC converters
  • Point-of-load regulation in digital systems
  • Battery-powered devices
  • USB-powered circuits
  • Consumer electronics and industrial control systems
  • Hard disk drive and embedded controller supplies

Alternative / Equivalent Products

  • LM1117 – Industry-standard LDO regulator
  • AMS1117 – Widely used low-cost alternative
  • LD1117 – STMicroelectronics LDO
  • TLV1117 – TI improved LDO version
  • AP1117 – Diodes Inc. regulator

 

NX1117CADJZ Datasheet PDF Download


NX1117CADJZ pdf

Other data sheets are available within the file:

7CE18Z, N7C25Z, NX1117C12Z, NX1117C18Z, NX1117C20Z

C-MH-18-790A-CM Datasheet PDF – DC Motor Controller

Part Number: C-MH-18-790A-CM

Function: DC Motor controller / No IR Module Required

Manufacturer: Electrol

Images :

C-MH-18-790A-CM datasheet

Description

C-MH-18-790A-CM is a DC motor controller designed for multiple horsepower applications, supporting dual voltage operation with a 12A continuous current rating when properly heat-sinked. It incorporates SCR-based control, soft-start functionality, and precise speed regulation with adjustable parameters for torque, acceleration, and speed range. This controller is typically used with DC motors and gearmotors in industrial and commercial motion control systems.

Features

  • Dual voltage operation for 90V and 180V DC motor applications
  • 12A continuous current rating with appropriate heat sinking
  • 2% base speed regulation with line voltage compensation
  • Wide 50:1 speed range with constant torque capability
  • Soft-start circuitry for reduced mechanical stress
  • Integrated transient and surge protection
  • SCR-based discrete power components for improved heat dissipation
  • Power ON/OFF switch and status indication (enclosed models)
  • Includes 5kΩ, 5W speed control potentiometer
  • Flexible connection via screw terminal or plug-in terminal options

Design Notes

  • External heat sink is required for high horsepower applications to maintain thermal stability
  • Proper adjustment of IR compensation is critical for maintaining constant speed under varying loads
  • Ensure adequate ventilation when used in enclosed systems
  • Line voltage compensation helps maintain stable motor performance under supply variations
  • Use proper fuse protection and wiring practices for safety compliance

Typical Circuit Usage

  • DC motor speed control systems
  • Industrial conveyor and material handling equipment
  • Gearmotor-driven automation systems
  • Variable speed drives in machinery

How to Choose This Part

  • Select based on required motor voltage (90V or 180V DC)
  • Ensure current rating matches motor load requirements
  • Consider thermal management for continuous high-load operation
  • Suitable for applications requiring wide speed control range with stable torque

Applications

  • Industrial motor control systems
  • Packaging and processing machinery
  • Automation and motion control equipment
  • Commercial motor-driven devices

Alternative / Equivalent Products

  • KB Electronics KBIC series
  • Minarik MM series DC drives
  • Dart Controls 125 series
  • MC-60 motor controller

Reference World_Class_790A PDF :
 pdf

Other data sheets are available within the file: CMH18790CM, CMH-18-790A-CM, C-MH-XB-790A-E

C-MH-18-790A-CM Datasheet PDF Download


C-MH-18-790A-CM pdf