AWS5506S14 Datasheet – SPDT Reflective Switch ( PDF )

Part Number: AWS5506S14

Function: GaAs IC SPDT Reflective Switch Positive Control DC-2.5 GHz

Package: SOT-6 Type

Manufacturer: ANADIGICS

Pinouts:

AWS5506S14 datasheet

 

Description

AWS5506S14 is a Single-Pole Double-Throw (SPDT) RF switch implemented using GaAs MMIC technology, designed for low insertion loss, compact size, and low power consumption. It is widely used in RF signal routing for wireless communication systems, especially in dual-band and multi-mode applications.

Features

  • SPDT (Single Pole Double Throw) RF switch
  • Low insertion loss: ~0.4 dB @ 0.9 GHz
  • Wideband RF performance (suitable for sub-GHz to GHz range)
  • Complementary positive control voltage (0 / +3V to 0 / +5V)
  • Supply voltage: +3V to +5V
  • Low DC power consumption
  • High isolation between ports (typical for GaAs switches)
  • Ultra-miniature SOT-6 package

Functional Description

  • Routes an RF signal from a common port to one of two selectable output ports
  • Control voltage determines signal path (RF1 ↔ RF2 or RF1 ↔ RF3)
  • GaAs FET structure enables low loss and high-frequency operation
  • Designed for minimal signal distortion and high linearity

Control Interface

  • Complementary control inputs allow easy logic interfacing
  • Compatible with standard CMOS/TTL control levels (3V / 5V systems)
  • Low control current requirement

Design Notes

  • Ensure proper 50Ω impedance matching on RF traces
  • Minimize PCB trace length to reduce insertion loss and reflections
  • Use RF layout best practices (ground plane, via stitching)
  • Decouple supply pin with RF-grade capacitors
  • Avoid exceeding maximum RF input power levels

How to Choose This RF Switch

  • Select based on frequency range and insertion loss requirements
  • Ensure isolation meets system-level RF performance targets
  • Verify control voltage compatibility with system logic
  • Consider package size for compact RF module designs

Typical Applications

  • RF signal routing in wireless systems
  • Dual-band / multi-band mobile handsets
  • RF front-end modules (FEM)
  • Switching between filters or amplifiers
  • Frequency synthesizers and signal chains

Alternative / Equivalent Products

  • Skyworks SKY13317 (RF switch alternative)
  • Peregrine PE4259 (higher performance RF switch)
  • HMC series RF switches (Analog Devices)
  • MASW series (MACOM RF switches)

Other data sheets are available within the file: AWS5506

AWS5506S14 Datasheet PDF Download


AWS5506S14 pdf

CAHCT1G04-Q1 Datasheet PDF – Single Inverter Gate

Part Number: CAHCT1G04-Q1

Function: Single Inverter Gate

Package: SOT-23, SC-70 Type

Manufacturer: Texas Instruments

Pinouts:

CAHCT1G04-Q1 datasheet

Description

CAHCT1G04-Q1 is a single-gate inverter IC qualified for automotive applications, operating over a 4.5V to 5.5V supply range in a compact package. It delivers fast switching performance with low propagation delay, TTL-compatible inputs, and low power consumption while providing robust ESD protection. This device is widely used in automotive electronics, signal inversion, and logic-level interfacing within control systems.

Features

  • Single inverter gate (NOT logic function)
  • Automotive-qualified (AEC-Q100 compliant)
  • Operating voltage range from 4.5V to 5.5V
  • Maximum propagation delay of 7.5ns at 5V
  • Low power consumption with 10µA maximum ICC
  • ±8mA output drive capability at 5V
  • TTL-compatible input thresholds
  • ESD protection exceeding 1500V (MIL-STD-883, Method 3015)

Design Notes

  • Ensure proper decoupling with a 0.1µF capacitor close to VCC for noise suppression
  • Maintain clean signal routing to take advantage of fast switching performance
  • TTL-compatible inputs allow easy interfacing with legacy logic systems
  • Consider propagation delay in timing-critical automotive designs
  • ESD robustness makes it suitable for harsh automotive environments

Typical Circuit Usage

  • Signal inversion in digital logic paths
  • Waveform shaping and buffering
  • Level interfacing between TTL and CMOS logic
  • Control signal conditioning in automotive ECUs

How to Choose This Part

  • Select for single-gate inverter needs in compact designs
  • Suitable for automotive applications requiring AEC-Q100 qualification
  • Ideal when TTL input compatibility is required at 5V operation
  • Choose for low-power and high-speed signal inversion tasks

Applications

  • Hybrid, electric, and powertrain systems
  • Advanced Driver Assistance Systems (ADAS)
  • Automotive body electronics and lighting
  • Infotainment and instrument cluster systems

Alternative / Equivalent Products

  • SN74AHCT1G04
  • SN74LVC1G04-Q1
  • 74HC1G04
  • NC7SZ04

Other data sheets are available within the file:

1A1G04QDBVRG4Q1, CAHC1G04QDCKRG4Q1, CAHCT1G04-Q1,

SN74AHC1G04QDBVRQ1, SN74AHC1G04QDCKRQ1

 

CAHCT1G04-Q1 Datasheet PDF Download

CAHCT1G04-Q1 pdf