Part Number: AD8351
Function: Low Distortion Differential RF/IF Amplifier
Package: MSOP 10 Pin Type
Manufacturer: Analog Devices
Image and Pinouts:
Description
The AD8351 is a low cost differential amplifier useful in RF and IF applications up to 2.2 GHz. The voltage gain can be set from unity to 26 dB using a single external gain resistor. The AD8351 provides a nominal 150 Ω differential output impedance. The excellent distortion performance and low noise characteristics of this device allow for a wide range of applications.The AD8351 is designed to satisfy the demanding performance requirements of communications transceiver applications. The device can be used as a general-purpose gain block, an ADC driver, and a high speed data interface driver, among other functions. The AD8351 can also be used as a single-ended-todifferential amplifier with similar distortion products as in the differential configuration. The exceptionally good distortion performance makes the AD8351 an ideal solution for 12-bit and
14-bit IF sampling receiver designs.
Features
1. –3 dB bandwidth of 2.2 GHz for AV = 12 dB
2. Single resistor programmable gain
3. 0 dB ≤ AV ≤ 26 dB
4. Differential interface
5. Low noise input stage 2.7 nV/√Hz at AV = 10 dB
6. Low harmonic distortion
–79 dBc second at 70 MHz
–81 dBc third at 70 MHz
7. OIP3 of 31 dBm at 70 MHz
8. Single-supply operation: 3 V to 5.5 V
9. Low power dissipation: 28 mA at 5 V
10. Adjustable output common-mode voltage
11. Fast settling and overdrive recovery
12. Slew rate of 13,000 V/µs
13 Power-down capability
Applications
1. Differential ADC drivers
2. Single-ended-to-differential conversion
3. IF sampling receivers
4. RF/IF gain blocks
5. SAW filter interfacing
Other data sheets are available within the file:
AD8351EVAL, AD8351ACPZ-R7, AD8351ARM, AD8351ARM-REEL7
AD8351 Datasheet PDF Download
